show first message show previous message Showing Logic-users Message 21627 of 246233 show next message show last message

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: "Martin Saleteg" <azeteg2@...>
Date: Sat, 1 Apr 2000 at 3:03:32 PM
Subject: Re: [LUG] [LAWP] Hammerfall Troubles
Message #21627
This is a reply to #21623.
Gilles, It is not advisable to move it as far from the graphics card (AGP) as possible. The best place for an audio card is indeed PCI slot 2. PCI slot 1 is the one right next to the AGP slot and it shares some resources with it. Therefore you should only put low-data-usage-cards in this slot. Martin Saleteg From: Gilles Ruppert <denise.ruppert@...> > What often helps is to change the slot of the audio card (best is far away > from the graphic card) > Hope this helps, > Gilles > > > Hi Martin > > In Logic with Asio-Driver: increasing to 8192 (186ms) in the control-panel > of the > hammerfall: not really better > in SoundForge with MME-Driver set the buffer to 1024 kb (highest possible): > little > bit better, but if I have the highest zoomresolution and the wavescrolling > is running fast > the audio is only stuttering and slows down. > If I deacrese the graphic-hardware acceleration the worse it becomes. > So it has to do with the graphic-cards. > > Martin Saleteg schrieb: > > > What buffer size are you running on? Try to increase it, to put some load > off the CPU. > > > > Martin Saleteg > > > > > > >
Viewed 491 times, 2 replies, 13 messages in thread. Reply to this message. Read this thread.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!


© 1994-2008, All Rights Reserved.