Are you running the Hammerfall in PCI-slot 1? If you are, try to move it to slot 2. Martin Saleteg ----- Original Message ----- From: Frank Schindler <phalarope@...> To: <logic-users@onelist.com> Sent: Saturday, April 01, 2000 6:11 PM Subject: Re: [LUG] [LAWP] Hammerfall Troubles > Hi Martin > > In Logic with Asio-Driver: increasing to 8192 (186ms) in the control-panel of the > hammerfall: not really better > in SoundForge with MME-Driver set the buffer to 1024 kb (highest possible): little > bit better, but if I have the highest zoomresolution and the wavescrolling is running fast > the audio is only stuttering and slows down. > If I deacrese the graphic-hardware acceleration the worse it becomes. > So it has to do with the graphic-cards. > > Martin Saleteg schrieb: > > > What buffer size are you running on? Try to increase it, to put some load off the CPU. > > > > Martin Saleteg > > > > ----- Original Message ----- > > From: Frank Schindler <phalarope@...> > > To: <logic-users@onelist.com> > > Sent: Saturday, April 01, 2000 4:39 PM > > Subject: [LUG] [LAWP] Hammerfall Troubles > > > > > Hi Luggers > > > > > > just installed Hammerfall. > > > I get zipping noises if I click something (e.g. zooming). > > > tried with Logic 4.1.4, SoundForge 4.5 > > > tried different videocards (Relvolution 3D Number Nine 8MB, Diamond > > > Multimedia Stelth 64) in different PCI-slots with different IRQ...... > > > ...always the same trouble. > > > Could someone help? Joeri perhaps. > > > > > > System: > > > PII 350 > > > IBM 8GB System,Apps > > > IBM 7200rpm 13.5 Recording > > > Asus P2B > > > Graphics see above > > > Hammerfall (with new Eprom) > > > 128 Ram > > > > > > > > > > > > > > > > > > > >