Recently kurt goebel wrote: > From: kurt goebel <midiwizz@...> > > I sent my AMIII to Digi to get the correct rev update so I can use it with my > new G4 450 AGP and LAMP 4.15. Well I got it back and the computer freezes > when the card is installed and Digi INIT 5.0 is active in the extensions > folder. If I pull the card, start the computer and disable the digi init, > then reinstall the card, the computer will start up but as soon as the digi > init is turned on in the extension manager, the G4 freezes when the welcome to > OS9 window > comes up during startup. > The AMIII should be compatible now that digi upgraded it. I have also tried > Digi init 3.4 and the same result. I can run Logic using the mac av with no > problem but this freaking card is giving me problems. What else can I try? > The G4 came with OS9. I also have a Formac ProRaid II SCSI card as well as a > Ixmicro Ultimate Rez driving my second monitor. In a former post, i wrote: From Digi Germany i heard, PT Project card is not compatible with DAE/DSI 5.0. You must use DAE/DSI 3.4.2 (3.4.1) which came with the Card. Since 3.4.2 does not work with OS9 (all new G4 models) there is no chance to reliably run PT project. I fear this might be true also for AM III. You have to contact Digidesign again. If you have one of the first G4/450 Machines you may install the original system 8.6. If not, ask your dealer to install a G4/450 Sawtooth system 8.6 and burn it on a CD. Then copy it to your machine and it might work. If nothing helps feel free to contact me privately. cu klo ----------------------- Klaus Lotz e-mail: klo@... http://www.musicshop.de http://www.chrom.de/home/pogatschar (Mac9600/G3/250MHz/OS9/PT24Mix/2xOldFarms/2xSCell/Magma/U-DMA-Raid,MiroDC20)