|
Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!
On 02.05.2006, at 10:14, krikor kouchian wrote:
> Anyone experienced that, or found a solution to such a problem...
No good news. I had a whining noise in my Firewire 410 and all my
gear is fed by a Furman line conditioner. The sound was not like you
describe but a steady tone around 330 Hz. Maybe it was the processor
but who knows how a processor is suppposed to sound. It had
definitely to do with the Mac and that interface because I unplugged
everthing, left just the iMac G5, the 410 and headphones and the
noise was here. I could almost tame it by sending the monitor mix
through a small mixer but then I bought a Saffire and the noise was
gone. I was not happy with that device, bought a RME Fireface instead
and it is also quiet.
I do not know how one can test such a setup. Your friend could try
another interface and you could try her interface on your computer.
If the sound remains with one pair you know at least where the
failure is. But if both combinations are quiet, hm. That would just
tell that this particular 410 does not properly work with this
particular computer.
Btw, my noise wasn't always here, it came after one year, approximately.
___
Peter Ostry
Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search! © 1994-2008, All Rights Reserved. |