On 30.04.2006, at 23:19, djunquemel wrote: > The sound is all broken up and there > are delays, and phase shifts between the two monitors. Plug in your headphones instead of the monitors. If the sound is ok, connect only one monitor. If the sound is still ok, connect only the other one. Still ok? Connect both. I suspect a problem with your cabling. You wrote that you use stereo cables and those are most likely not right for your setup. The Bx5a monitors accept balanced and unbalanced lines and your lines are unbalanced. Therefore you should use mono cables or connect the ring and shield in each stereo plug. As John said, a 3.5mm-to-RCA adaptor and RCA to 1/4" mono cables are the right choice for you. If you don't get RCA to mono cables take a RCA cable and two RCA to mono adaptors. ___ Peter Ostry