> <<Right now I know how to add only ONE amount of reverb to the > entire track.... I need to learn that next part..anyone know were > I can find it in the manual...?>> > There's multiple way this can be accomplished. This is what generally makes the most sense when applying reverb or delay type efx. - set your reverb or delay plug in up on a Buss. For the following example I will put the plug-in on BUSS 1 - be sure that the mix is 100% wet.....it should automatically default to this on a buss - go to the channel (or channels) you want to add reverb to....in the SEND section create a send to BUSS 1 postfader - bring this send up.....you will now be sending a signal to the reverb on BUSS 1 - adjust how much reverb you want by bringing the BUSS 1 fader up or down - in order to change this through out the song you can either automate the individual channel send or the BUSS fader returning to your mix Using reverbs and delays on busses are usually better than applying them to individual channels since lots of reverbs on lots of channels eats up lots of CPU power unneccesarily Ron Reitz Lakewood Productions