On 31.03.2006, at 05:41, forums@logic-users.org wrote: > I just got a Lexicon mx200 and can't seem to get > the darn thing working right. I'm running the s/pdif out on the > motu to the > s/pdif in on the lexicon and vice versa. Can anyone suggest the > best way to > implement this into logic so I can use the lexicon as an external > reverb/effects device? I tried setting up a bus in Logic with the > out going > to the motu s/pidif (11/12). Use the I/O plugin. Setting it's output and input to 11/12 should work. I do that with a Fireface and the MX200 all the time. > Seems like its working, but very faint and > there's a lot of crackle present. Faint? Can't confirm that. Responds very accurate here. You know that the MX200 accepts only sample rates of 44.1 and 48 kHz? And your Motu should be set as master clock device. If both applies to your setup the crackles come probably from a too small buffer size in Logic. The Lexicon does not need much buffer though, I run it with 512 which is also necessary for the bigger softsynths on my Mac. ___ Peter Ostry