"Boyd Post" <boyd@s...> wrote: > I have done this with Vstack and Plogue Bidule with success. > Unfortunately you must send it midi the old fashioned way (out of one > midi interface and into the other) and the output must be brought into > the Mac traditionally as well...I used the adat outputs of a RME card on > the PC side to the adat inputs on my Metric Halo MIO. > There is no way to currently use Ethernet to do this in a cross platform > fashion...you can do it PC to PC and Mac to Mac, but you cant mix it up > unfortunately. You might be able to do this with SX and system link, > but not using logic. > Suffice to say, it worked, but I found it annoying to have to switch > platforms and machines just to make changes to a plugin. > Good Luck http://www.musiclab.com/products/rpl_info.htm they say it can be done...Macs & PCs in a unified network. there's a demo available ,maybe give it a whirl. u could control the PC via VNC, but its probably best to just use a KVM switch to switch over when to need to. (if u don't want 2 monitors/keyboard/mice on your desk)