--- In logic-users@yahoogroups.com, "Geoff Kaiser" <geoffkaiser@m...> wrote: > --- In logic-users@yahoogroups.com, "leyba71" <leyba71@y...> wrote: > > I'm very new to the Logic Pro 6 software and I'm not getting any > > sound generated when playing the onboard instruments (Grand Piano). > > The music notes are showing up in the matrix window that are > > generated from a Radium 61 Midi Controller so I know it recognises > > that and I am using MOTU 828 mk2 as my firewire source. Is there a > > setting somewhere in the Logic program that I just don't see? Some > > advice would greatly be appreciated. > > Could be one of a thousand things, but try some of these- > > This may be too obvious, but under "Audio-->Audio Hardware and Drivers" make > sure the 828mkII is selected in the pop-up menu in the CoreAudio driver... > > make sure the piano track isn't muted in the arrange window AND the channel isn't > muted in the mixer window. (also make sure channel 1 isn't muted) > > Make sure the output of the track is routed in the mixer channel strip to the standard > output going to your 828mkII (Output 1-2 or whatever your 828 says). > > When you play back your MIDI part, watch the meter on your 828mkII - if nothing is > appearing in the meter, then there's something in Logic that needs to be changed - if > you're getting a meter signal but no sound, you might check your amp and monitors, > etc. > > GK Thanks for the onfo Geoff but unfortuntely it didn't work. I am running Reason 2.5 on the same system (G5) and I get sound from it but for some reason no sound is coming out of Logic.