el_honky_boy wrote: > I am using Logic Platinum 6 on a G4 Powerbook under OSX 10.3.1. I am trying to > hook my 01V up to it as a remote controller over midi. > > I have been successful in doing this for the audio track objects in my environment > using the 'remote' pages of the 01V, and I am able to control fader movement for > audio track objects in Logic via Ctrl 7, Mute via Ctrl 9 and Solo Ctrl 3. > > However using the same controllers on an Audio Instrument works for the volume > fader only (ctrl 7). The Audio Instrument channels objects seem to ignore the Mute > and Solo ctrl codes (9 and 3) completely. I've flicked through all the ctrl > codes 1-127 in an attempt to see if there these objects respond to a different ctrl > code but they seem not to. (Pan ctrl 10 does work however so it doesn't seem to be a problem with my set up). I have a similar problem and was looking through here for the answer but can't find it. I am having a problem automating anything [besides volume] on the Audio Instrument channels with my midi controller. After looking deeper into it, I found that the same things automated in the Audio Channels are being read/sent as "Control" msgs BUT in the Audio Instrument channels, they are being read/sent as "Fader" msgs. Anyone know how to program these "fader" msgs to be controlled by midi controllers? -jamie PS. I found out what they were by automating with the mouse, then using the command "move automation data to object". Then I was able to see the automation data in the Event Editor to see what msgs are being sent. This is how I found out that the Audio channels are using control msgs and the Audio Instrument channels are using fader msgs.