On 03-11-02 09.41, "Roy Walter" <raweb61@...> wrote: > How do I record in cycle mode, making new tracks with each pass that are all > played back (not just the most recent)? I wish to build up a chorus of 20 > voices > but don't want to define each track and record it individually. > > Is this not possible in Platinum 6.1? > Thanks, > roy Hi Roy, You can set Logic to create a new track for each cycle in recording mode, but only a track of the same channel. To do the trick you are describing I'm using either external hardware looping samplers like the Gibson Digital Echoplex or the Electrix Repeater. I have also been doing it with the plug-in Lexicon PSP42, where layer feedback can be controlled in real-time by external midi faders. However, you can layer many voices with just about any delay plug-in set to a high feedback rate. Keep Logic running with the track in recording mode and round it up with bouncing the best bars to disk and importing it to the song. Cycle recording with automatic track change of the same audi channel have been possible all back since Logic 2, when I started using the software. To set this up go to "File/Song Settings/Recording Options". Make sure "Auto Mote in Cycle Record" is not selected and select "Auto Create Tracks in Cycle Record". Then go to "Logic Platinum/Preferances/ -- Best wishes Per Boysen www.boysen.se