On 31/05/03 13:49, "Timo" <tneronen@...> wrote: >> Emagic support told me that their midi interfaces are able to do that. >> Every other interface will send midi clock only to the first port if >> "send midi clock to all" is selected. >> Sending only a midi clock stream is obviously much more efficient than >> sending many streams, but I think that if you have 2 midi interfaces, >> even emagic ones, only one will receive midi clock. I say this because >> I have a Tascam US-428 and a midiman 4x4 and only one of them receives >> midi clock on the first port. > > > Do you know is this hardware or driver issue? I am very close to buy AMT8 > because I am very bored to use MidiPatchbay > (http://pete.yandell.com/software/) to send midiclock to all ports of my > Midiman Midisport 8/8s. > > Timo > LAP 6.1, EXS24, ES1, ES2, EVOC20, OSX 10.2.6 > There is a bug in Logic, ! If you set Transmit Midi Clock in the Synchronization / midi menu to : (see first attachment : Picture 1) all X all The clock is sent only to my USB AMT 8 If you set Transmit Midi Clock in the Synchronization / midi menu to : (see second attachment Picture 2) port 8 (stealth port) X all X The midi clock is sent to all my midi interfaces Thanks in advance for fixing this ! Best regards Cyril Blanc France G4/533 MP 1GB 40+80 GB + 74 GB Raid 0, RADEON 8500 + 2x22" Iiyama Motu system including : 324 + 24i + 2048 MKII + 1296 Logic Control + 4 Logic control ¹XT Midi interfaces : Stealth + OPCODE STUDIO 4 + MOTU MTP I networked ; USB EMAGIC AMT 8