At 21:48 +0200 31.07.02, Pianissimo Productions wrote: >with my untitor 8 mk 2 the 8 leds light immedately , then the >VITC end LTC leds start to blink , is this normal? At startup, first the self test is done (within one second, so you probably don't notice that the LEDs go on subsequently), then all in and out LEDs blink several times. In normal operation either the LTC or VITC Lock LEDs flash, to signal that the Unitor8 is ready to read a signal from this input. If this disturbs you, set the SMPTE mode to "off" in Unitor8 Control. -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -