Logic Users Group - Forums - L-TDM

sorry for the confusion... also, I've not worked with the "DIGI" chassis. only the Magma, of which I've had excellent results with. I stopped using the DTDM bridge when I moved to versions 7.2.x. Mostly because I feel like it's been flakey all along. I can't keep restarting every time the EBS farts out. IMHO You'd have better luck running Logic with the core driver and coming out of the mac optical into your Digi I/O. I wasn't aware any version of 7.1 of PT ran with 7.2.x of Logic. In regards to the ESB and EXS24 not being supported when using the Chassis? That doesn't really make any sense to me. Sometimes digi's way of saying "not supported" simply means they did not test it to begin with, not that it doesn't work. I'd be tempted to try it and see. On Oct 21, 2006, at 5:41 PM, Judson wrote: > nope, wasn't me....this is the new digidesign expansion chassis HD > that I'm talking about. Same chassis? This is the text from the > Digi tech article: > > Logic Pro with Expansion|HD Chassis > Logic Pro 7.2 DAE is supported with the Digidesign Expansion|HD 6 > slot expansion chassis when used with the files included with the > installation of Pro Tools HD 7.1cs4 or higher (including Pro Tools HD > 7.2) for Mac OS X for PowerPC. However, the ESB and EXS24 features > are not supported with the Expansion|HD chassis. > > > Have you had a different experience? I'd like to try and get that > thing working again so I can put an aurora fuse-X card in the G5 > > thanks, > judson > > > On Oct 21, 2006, at 7:40 PM, Bob DeMaa wrote: > >> Judson,weren't you using a mix+ system with a powerbook? I thought we >> sorted it out that the issue was related to using the Mix+ cards >> specifically with the powerbook. >> >> I've used HD cards with both G5 and Powerbook and Chassis with ESB >> enabled. There's no issue with ESB and Chassis specifically that I >> have ever encountered. >> >> bd >> >> On Oct 21, 2006, at 1:20 PM, Judson wrote: >> >>> I bought one to use with Logic and Protools and couldn't get it to >>> work with Logic....its possible that its because I had ESB >> enabled--I >>> read that they are not compatible but I haven't tried it again >>> since. You must use Protools 7.1 and it supposedly increases your >>> RTAS/TDM latency time with virtual instruments (only in record mode, >>> it is compensated on playback). >>> >>> -Judson >>> >>> On Oct 21, 2006, at 11:48 AM, erockerboy wrote: >>> >>>> Is anyone here successfully using a Digidesign expansion chassis to >>>> house their PTHD cards? >>>> >>>> Any pros/cons? How's the stability? >>>> >>>> I am trying to figure out how to add a host SATA adapter for >>>> additional >>>> HD storage, and need to free up a PCI slot to do so. The expansion >>>> chassis looks like one of the few options available to me at this >>>> point. Would love to hear from anyone currently using one. >> Thanks in >>>> advance! >>>> >>>> >>>> >>> >>> >>> >>> >>> >>> >>> >>> __________________________________________________________ >>> __ >>> Logic TDM Users Group - new forums! http://logic-users.org/forums/L- >>> TDM >>> - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com >>> - Search the entire archive: http://logic-users.org/forums/L-TDM/ >>> search >>> Yahoo! Groups Links >>> >>> >>> >>> >> >> >> > > > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >

I've just added one to my setup and am in the trenches: G5Quad PPC / OS10.4.6 / Logic 7.2.3 / PT 7.1cs9 / HDExp Ch housing HD3Accel w/1 old process card / one 192 / two 192Dgtl / Rosetta800 on the 192/ one Adat Brg24 on 1st 192D. No ESB or TDM/EXS24 enabled. I run RME Fireface 800 into 192 via opti. It's not 100% yet. The main problem is Logic not retaining DAE prefs: it ALWAYS comes back to this setting- PT HD Type:192 Tracks (6 DSPs) Way more chips than I want to use for track count, most of my old sessions will not even open with this 6 chip setting. So, I set it to my usual 64 Tracks (2 DSPs) but it won't stick. Always comes back 192 tracks 6 chips on relaunch. (I also always first set my DAE prefs via PT Hardware Setup, then mimic them when I setup Logic. In this case, that does not matter..WTF Regarding which PT version to use..I tried PT 7.2.1, but it did not allow me to record (crashed repeatedly) yesterday, so back to PT 7.1cs9. When I get this working, I can already see the advantage of having the ExpCh..adding the old process card was one..not having to trade in my digi pcix cards at ream job prices was another.. Another note..I did not install the DigiCoreDriver..the first time around I did and some mystery app kept grabbing it and the digi hardware, not letting TDM to enable. I never tracked this problem down and just opted to lose the driver. keep ya posted Mark --- In logic-tdm@yahoogroups.com, "erockerboy" <erockerboy@...> wrote: > > Is anyone here successfully using a Digidesign expansion chassis to > house their PTHD cards? > > Any pros/cons? How's the stability? > > I am trying to figure out how to add a host SATA adapter for additional > HD storage, and need to free up a PCI slot to do so. The expansion > chassis looks like one of the few options available to me at this > point. Would love to hear from anyone currently using one. Thanks in > advance! >

quote: (re: L7.2.3) "PT 7.1 is not an option when running this version of Logic." that's interesting. My experience is L7.2.3 works fine with DAE 7.1cs4 and Up (not counting the track count pref. anomaly). I'm using DAE 7.1cs9 now. DAE 7.2 created many problems including auto-input bug. Mark --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > The auto input needing to be on is true. > > BUT, he's already running Logic 7.2.3. PT 7.1 is not an option when > running this version of Logic. He must use PT 7.2 > > bd > > On Oct 21, 2006, at 5:34 PM, brio taliaferro wrote: > > > I would stick with PT 7.1.x if you occasionally like to have auto > > input monitoring switched OFF. > > Digidesign changed something in 7.2 that LOGIC has not yet reacted > > to, AFAIK. > > The effect is that auto input monitoring has to be switched ON in > > LOGIC at all times, when using DAE 7.2.

Thanks everyone!! So i must stay with DAE 7.1csx and Logic 7.2.3...is that right? I really need a stable system and all i had with DTDM was headache... I would apreciate any other help! Thanks again Victor

I've had my share of the "random playback on track 1 bug", but today I experienced a new one (to me): Whenever I try to record, my DAE tracks just stops playing back. Randomly a few keeps running and sometimes all of them dissapear. All DTDM tracks and all Midi still there. The only remedy was to quit and reboot, but after 30 minutes the problem reappear. That´s how my day continued..around 5 quit's and reboots. Is this something you all are experiencing? Any suggestions to solve things? TIA, Erik

Hi All: This is a reminder about our next NY Logic Pro Users Group (NYLPUG) meeting: to be held on October 30th, 6-7:30 PM, at Dale Pro Audio, in Manhattan, NYC. I currently have 27 RSVPs. I believe the room at Dale holds about 40 people legally and comfortably, so please RSVP -- RSVP-ers will get priority in the event it gets too crowded for comfort. We will have as a special guest producer and songwriter Toby Gad. Here's a brief summary: • 10 Billboard hit records, 4 MTV sponsored Awards and BDA gold Award • 70+ record releases worldwide on major labels as a song writer and producer • Records include Fergie, Ricky Martin, Enrique Iglesias, Fatty Koo, Jaci Velasquez, Kaci Brown, The Veronicas... • Soundtracks include Hitch, Barbershop2, Wild Thornberries, Neverending Story 3... http://www.tobygad.com Toby is an avid Logic user, and you can bet it will be a most interesting and informative evening! We may take this opportunity to create the first LUG podcast ever. Please RSVP if you plan on attending, via return email to me. Dale is located in Manhattan, at 22 W. 19th St., 2nd floor, between 5th and 6th Ave. ________________________________________________________________________ ______________________________________________________________ Jonathan Perl • Associate Director, Sonic Arts Center at the City College of New York. sonic.arts.ccny.cuny.edu • Apple Certified Trainer for Logic Pro. Apple Authorized Training Center. www.macaudiotrainers.com • Get the ultimate Logic training DVD, Inside Logic Pro 7.1. www.digitalmediatraining.com/products/logicpro7/ ________________________________________________________________________ _______________________________________________________________

--- In logic-tdm@yahoogroups.com, Victor Pozas <victorpozas@...> wrote: > Thanks everyone!! > So i must stay with DAE 7.1csx and Logic 7.2.3...is that right? > I really need a stable system and all i had with DTDM was headache... > I would apreciate any other help! Hi Victor With L7.2.3 I didn't have luck with DAE7.2, but I did with DAE 7.1cs9. Others seem to have had the opposite experience. If you try both, remember to install the appropriate plug in updates accordingly. Mark

Hi, In Logic 7.2.3 I am using DAE 7.1cs9. No matter what I set the "PT HD Type" setting to, it ALWAYS comes back set at 192 Tracks (6 DSPs) when I re-launch. I don't want to use 6 DSPs. I only need 64 Tracks (2 DSPs). This occurs using the DAE 7.2.1 engine as well. If anyone has any insight into this, it would be appreciated. I have uninstalled/reinstalled Logic & PT a few times now..same problem. This is a G5Quad ppc, so maybe that's the issue. Anyone using this combination of software/hardware on a G5Dual Thanks, Mark G5Quad PPC, OS 10.4.6, 4.5Gram, L7.2.3, PT 7.1cs9, Digi HD ExpChassis with HD3Accel + process card

Sometimes... randomly... it can help to start up the PT software and configure the DSP settings there. Then when you go back to Logic, it's possible the new settings will hold. - Dave On Oct 22, 2006, at 4:59 PM, ativity2003 wrote: > Hi, > In Logic 7.2.3 I am using DAE 7.1cs9. No matter what I set the "PT HD > Type" setting to, it ALWAYS comes back set at 192 Tracks (6 DSPs) when > I re-launch. > I don't want to use 6 DSPs. I only need 64 Tracks (2 DSPs). > This occurs using the DAE 7.2.1 engine as well. > > If anyone has any insight into this, it would be appreciated. > I have uninstalled/reinstalled Logic & PT a few times now..same > problem. > This is a G5Quad ppc, so maybe that's the issue. Anyone using this > combination of software/hardware on a G5Dual > > Thanks, > Mark > > G5Quad PPC, OS 10.4.6, 4.5Gram, L7.2.3, PT 7.1cs9, Digi HD ExpChassis > with HD3Accel + process card > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >

Thanks for the reply Dave. Yeah, I've done that. Logic 7.2.3 ignores it. I did just get it to stick at "96 Tracks (2DSPs)"...my desired setting is 64 tracks, but I'll work with that. That seems to be the only reall issue with this setup..other than that, it's working well. Mark --- In logic-tdm@yahoogroups.com, David Gordon <music-pro@...> wrote: > > Sometimes... randomly... it can help to start up the PT software and > configure the DSP settings there. Then when you go back to Logic, > it's possible the new settings will hold. > > - Dave > > > > On Oct 22, 2006, at 4:59 PM, ativity2003 wrote: > > > Hi, > > In Logic 7.2.3 I am using DAE 7.1cs9. No matter what I set the "PT HD > > Type" setting to, it ALWAYS comes back set at 192 Tracks (6 DSPs) when > > I re-launch. > > I don't want to use 6 DSPs. I only need 64 Tracks (2 DSPs). > > This occurs using the DAE 7.2.1 engine as well. > > > > If anyone has any insight into this, it would be appreciated. > > I have uninstalled/reinstalled Logic & PT a few times now..same > > problem. > > This is a G5Quad ppc, so maybe that's the issue. Anyone using this > > combination of software/hardware on a G5Dual > > > > Thanks, > > Mark > > > > G5Quad PPC, OS 10.4.6, 4.5Gram, L7.2.3, PT 7.1cs9, Digi HD ExpChassis > > with HD3Accel + process card

When you went to Logic 7.2. Did you set the Record to auto input? Could this be why Logic was crashing on you? On Oct 21, 2006, at 7:13 PM, ativity2003 wrote: > > I've just added one to my setup and am in the trenches: > > G5Quad PPC / OS10.4.6 / Logic 7.2.3 / PT 7.1cs9 / HDExp Ch housing > HD3Accel w/1 old process card / one 192 / two 192Dgtl / Rosetta800 on > the 192/ one Adat Brg24 on 1st 192D. > > No ESB or TDM/EXS24 enabled. I run RME Fireface 800 into 192 via opti. > > It's not 100% yet. The main problem is Logic not retaining DAE prefs: > it ALWAYS comes back to this setting- PT HD Type:192 Tracks (6 DSPs) > Way more chips than I want to use for track count, most of my old > sessions will not even open with this 6 chip setting. > > So, I set it to my usual 64 Tracks (2 DSPs) but it won't stick. Always > comes back 192 tracks 6 chips on relaunch. > (I also always first set my DAE prefs via PT Hardware Setup, then > mimic them when I setup Logic. In this case, that does not matter..WTF > > Regarding which PT version to use..I tried PT 7.2.1, but it did not > allow me to record (crashed repeatedly) yesterday, so back to PT > 7.1cs9. > > When I get this working, I can already see the advantage of having the > ExpCh..adding the old process card was one..not having to trade in my > digi pcix cards at ream job prices was another.. > > Another note..I did not install the DigiCoreDriver..the first time > around I did and some mystery app kept grabbing it and the digi > hardware, not letting TDM to enable. I never tracked this problem down > and just opted to lose the driver. > > > keep ya posted > > Mark > > > > > > > > > > --- In logic-tdm@yahoogroups.com, "erockerboy" <erockerboy@...> wrote: >> >> Is anyone here successfully using a Digidesign expansion chassis to >> house their PTHD cards? >> >> Any pros/cons? How's the stability? >> >> I am trying to figure out how to add a host SATA adapter for >> additional >> HD storage, and need to free up a PCI slot to do so. The expansion >> chassis looks like one of the few options available to me at this >> point. Would love to hear from anyone currently using one. >> Thanks in >> advance! >> > > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >

After you set the prefs in Logic. Do you quit and reopen logic immediately? Di the prefs stick? Is it possible that you set the prefs, then at some point logic is crashing and that's causing it to ignore your changes? Just a thought. bd On Oct 22, 2006, at 7:48 PM, ativity2003 wrote: > Thanks for the reply Dave. > Yeah, I've done that. Logic 7.2.3 ignores it. I did just get it to > stick at "96 Tracks (2DSPs)"...my desired setting is 64 tracks, but > I'll work with that. That seems to be the only reall issue with this > setup..other than that, it's working well. > > Mark > > > > --- In logic-tdm@yahoogroups.com, David Gordon <music-pro@...> wrote: >> >> Sometimes... randomly... it can help to start up the PT software and >> configure the DSP settings there. Then when you go back to Logic, >> it's possible the new settings will hold. >> >> - Dave >> >> >> >> On Oct 22, 2006, at 4:59 PM, ativity2003 wrote: >> >>> Hi, >>> In Logic 7.2.3 I am using DAE 7.1cs9. No matter what I set the >>> "PT HD >>> Type" setting to, it ALWAYS comes back set at 192 Tracks (6 DSPs) >>> when >>> I re-launch. >>> I don't want to use 6 DSPs. I only need 64 Tracks (2 DSPs). >>> This occurs using the DAE 7.2.1 engine as well. >>> >>> If anyone has any insight into this, it would be appreciated. >>> I have uninstalled/reinstalled Logic & PT a few times now..same >>> problem. >>> This is a G5Quad ppc, so maybe that's the issue. Anyone using this >>> combination of software/hardware on a G5Dual >>> >>> Thanks, >>> Mark >>> >>> G5Quad PPC, OS 10.4.6, 4.5Gram, L7.2.3, PT 7.1cs9, Digi HD >>> ExpChassis >>> with HD3Accel + process card > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >

Hi Jon- Confirming my RSVP. Thanks-Joel Mofsenson

Yes, amomg other things..it was very unstable even before I set auto input..thought it might have been a bad install, so I uninstalled/reinstalled a few times, same problems..7.1cs9 doesn't do this..maybe the quad is an issue?? --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > When you went to Logic 7.2. Did you set the Record to auto input? > Could this be why Logic was crashing on you? > > On Oct 21, 2006, at 7:13 PM, ativity2003 wrote: > > > > > I've just added one to my setup and am in the trenches: > > > > G5Quad PPC / OS10.4.6 / Logic 7.2.3 / PT 7.1cs9 / HDExp Ch housing > > HD3Accel w/1 old process card / one 192 / two 192Dgtl / Rosetta800 on > > the 192/ one Adat Brg24 on 1st 192D. > > > > No ESB or TDM/EXS24 enabled. I run RME Fireface 800 into 192 via opti. > > > > It's not 100% yet. The main problem is Logic not retaining DAE prefs: > > it ALWAYS comes back to this setting- PT HD Type:192 Tracks (6 DSPs) > > Way more chips than I want to use for track count, most of my old > > sessions will not even open with this 6 chip setting. > > > > So, I set it to my usual 64 Tracks (2 DSPs) but it won't stick. Always > > comes back 192 tracks 6 chips on relaunch. > > (I also always first set my DAE prefs via PT Hardware Setup, then > > mimic them when I setup Logic. In this case, that does not matter..WTF > > > > Regarding which PT version to use..I tried PT 7.2.1, but it did not > > allow me to record (crashed repeatedly) yesterday, so back to PT > > 7.1cs9. > > > > When I get this working, I can already see the advantage of having the > > ExpCh..adding the old process card was one..not having to trade in my > > digi pcix cards at ream job prices was another.. > > > > Another note..I did not install the DigiCoreDriver..the first time > > around I did and some mystery app kept grabbing it and the digi > > hardware, not letting TDM to enable. I never tracked this problem down > > and just opted to lose the driver.

A couple of times I thought that might be the case..but now it opens and closes properly, just won't retain 64 tracks..I did get it to stick at 96 tracks 2DSPs..weird.. --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > After you set the prefs in Logic. Do you quit and reopen logic > immediately? Di the prefs stick? Is it possible that you set the > prefs, then at some point logic is crashing and that's causing it to > ignore your changes? Just a thought. > > bd > > On Oct 22, 2006, at 7:48 PM, ativity2003 wrote: > > > Thanks for the reply Dave. > > Yeah, I've done that. Logic 7.2.3 ignores it. I did just get it to > > stick at "96 Tracks (2DSPs)"...my desired setting is 64 tracks, but > > I'll work with that. That seems to be the only reall issue with this > > setup..other than that, it's working well. > > > > Mark > > > > > > > > --- In logic-tdm@yahoogroups.com, David Gordon <music-pro@> wrote: > >> > >> Sometimes... randomly... it can help to start up the PT software and > >> configure the DSP settings there. Then when you go back to Logic, > >> it's possible the new settings will hold.

The quad might be an issue. I haven't tried running a chassis on a quad yet. I have a close set up to yours. HD2, 192, Rosetta 200. Expansion Chassis (magma) But I had originally thought only PT PT 7.2 and Logic 7.2 went together. For me it's been working fine on both the Powerbook G4, and the Dual 2.7, just with the glitch of the auto input always being enabled. Best of luck. Let us know if you find the silver bullet. bd On Oct 23, 2006, at 7:44 AM, ativity2003 wrote: > Yes, amomg other things..it was very unstable even before I set auto > input..thought it might have been a bad install, so I > uninstalled/reinstalled a few times, same problems..7.1cs9 doesn't do > this..maybe the quad is an issue?? > > > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: >> >> When you went to Logic 7.2. Did you set the Record to auto input? >> Could this be why Logic was crashing on you? >> >> On Oct 21, 2006, at 7:13 PM, ativity2003 wrote: >> >>> >>> I've just added one to my setup and am in the trenches: >>> >>> G5Quad PPC / OS10.4.6 / Logic 7.2.3 / PT 7.1cs9 / HDExp Ch housing >>> HD3Accel w/1 old process card / one 192 / two 192Dgtl / >>> Rosetta800 on >>> the 192/ one Adat Brg24 on 1st 192D. >>> >>> No ESB or TDM/EXS24 enabled. I run RME Fireface 800 into 192 via >>> opti. >>> >>> It's not 100% yet. The main problem is Logic not retaining DAE >>> prefs: >>> it ALWAYS comes back to this setting- PT HD Type:192 Tracks (6 DSPs) >>> Way more chips than I want to use for track count, most of my old >>> sessions will not even open with this 6 chip setting. >>> >>> So, I set it to my usual 64 Tracks (2 DSPs) but it won't stick. >>> Always >>> comes back 192 tracks 6 chips on relaunch. >>> (I also always first set my DAE prefs via PT Hardware Setup, then >>> mimic them when I setup Logic. In this case, that does not >>> matter..WTF >>> >>> Regarding which PT version to use..I tried PT 7.2.1, but it did not >>> allow me to record (crashed repeatedly) yesterday, so back to PT >>> 7.1cs9. >>> >>> When I get this working, I can already see the advantage of >>> having the >>> ExpCh..adding the old process card was one..not having to trade >>> in my >>> digi pcix cards at ream job prices was another.. >>> >>> Another note..I did not install the DigiCoreDriver..the first time >>> around I did and some mystery app kept grabbing it and the digi >>> hardware, not letting TDM to enable. I never tracked this problem >>> down >>> and just opted to lose the driver. > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >

Very weird. I'm just going to assume you've tried fixing permissions and tossing prefs? bd On Oct 23, 2006, at 7:46 AM, ativity2003 wrote: > A couple of times I thought that might be the case..but now it opens > and closes properly, just won't retain 64 tracks..I did get it to > stick at 96 tracks 2DSPs..weird.. > > > > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: >> >> After you set the prefs in Logic. Do you quit and reopen logic >> immediately? Di the prefs stick? Is it possible that you set the >> prefs, then at some point logic is crashing and that's causing it to >> ignore your changes? Just a thought. >> >> bd >> >> On Oct 22, 2006, at 7:48 PM, ativity2003 wrote: >> >>> Thanks for the reply Dave. >>> Yeah, I've done that. Logic 7.2.3 ignores it. I did just get it to >>> stick at "96 Tracks (2DSPs)"...my desired setting is 64 tracks, but >>> I'll work with that. That seems to be the only reall issue with this >>> setup..other than that, it's working well. >>> >>> Mark >>> >>> >>> >>> --- In logic-tdm@yahoogroups.com, David Gordon <music-pro@> wrote: >>>> >>>> Sometimes... randomly... it can help to start up the PT >>>> software and >>>> configure the DSP settings there. Then when you go back to Logic, >>>> it's possible the new settings will hold.

Yes, tossed prefs and repaired every step of the way..even zapped pram..this DAE pref thing is a Logic bug I think..I submitted on apple. At leat I got it down to using only 2 dsps and my previous sessions will now open. --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > Very weird. I'm just going to assume you've tried fixing permissions > and tossing prefs? > > bd > > On Oct 23, 2006, at 7:46 AM, ativity2003 wrote: > > > A couple of times I thought that might be the case..but now it opens > > and closes properly, just won't retain 64 tracks..I did get it to > > stick at 96 tracks 2DSPs..weird.. > > > > > > > > > > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@> wrote: > >> > >> After you set the prefs in Logic. Do you quit and reopen logic > >> immediately? Di the prefs stick? Is it possible that you set the > >> prefs, then at some point logic is crashing and that's causing it to > >> ignore your changes? Just a thought.

Thansk for the replies Bob. Well, now I've installed DAE 7.2.1 and it is stable..I even have auto input enabled and it is working well. Still tho, DAE prefs in Logic will not retain the 64 Track setting, but will stick at 96 Tracks. Gonna run this all day and see what happens. Thanks Mark --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > The quad might be an issue. I haven't tried running a chassis on a > quad yet. I have a close set up to yours. HD2, 192, Rosetta 200. > Expansion Chassis (magma) But I had originally thought only PT PT > 7.2 and Logic 7.2 went together. For me it's been working fine on > both the Powerbook G4, and the Dual 2.7, just with the glitch of the > auto input always being enabled. > > Best of luck. Let us know if you find the silver bullet. > > bd > > On Oct 23, 2006, at 7:44 AM, ativity2003 wrote: > > > Yes, amomg other things..it was very unstable even before I set auto > > input..thought it might have been a bad install, so I > > uninstalled/reinstalled a few times, same problems..7.1cs9 doesn't do > > this..maybe the quad is an issue??

Hi all! Has anyone out ther used RAID 0 for Eastwest Symphonic Choir or perhaps Symphonic Orchestra? Have been using the EWQLSC today with lots of white annoying noise due to my Firewire 400Mbps 120Glyph Hard Drives only producing 11MB/s read capacity....which clearly is not enough juice. Perhaps eSATA II Hard Drive? I'm just learning about Stripe RAID (RAID 0) which interleaves the data between 2 or more Hard Drives. So, if i have 3x 120GByte Glyph Hard Drives, each producing a sustained rate of 11MB/s, does it really give me 33MBytes of read capcity (sustained) or is there some loss? What about the storage capacity? Protools does not support RAID right or does this mean they have just not tested it??? More importantly, is it enough juice for my EWQLSC samples? i.e. the full dynamic samples for SAT&B Look forwward to hearing from you. Ta Phill McMurtry www.midearthstudio.com www.myspace.com/pmcmurtry www.sonicbids.com/phillmcmurtry www.midearthmusic.co.uk www.wtfdrecords.com

Hi Been trawling to find best way to import my key commands from OS 9 system (Logic 6) to OSX Tiger and Logic 7.2. The icon in the OSX Logic pref file is very different to the one exported from OS 9. Ive tried changing the title of the OS 9 pref file to mirror the OSX pref file and also tried trashing the OSX pref file and manually dragging my old OS 9 pref file in to the correct location in the library but it dont work. I also tried the alternative route of choosing "Import Key Commands" from the Key Commands menu in Logic 7.2 but when I navigate to import, the original OS 9 pref file is greyed out. Any help would be fantastic.. Thanks Ged www.jackshoosemusic.com

Hi ED, I´m still waiting for your offer, concerning the HD 3 PCI RIG. What did you think about the Songs?

Hi I know this has been covered before but my Epic plug-ins just stopped working on my Logic 6/PT rig. Im using XS blue key. It says Critical Error.. I know this is a discontinued product but there seems to be many others who have obtained these codes from Apple a while back. I reckon I need the access codes from Apple but when I go to the link at Apple for the Logic support request form I cant see it. Can someone point me in the right direction for contacting Apple to hopefully get these codes...I need these plug-ins badly! Many thanks Ged www.jackshoosemusic.com

Try switching it to the other option for the number of DSP chips you want to use. Sometimes then it sticks and you can set it how you want it after that. I think I have done this from Logic itself and not from PT. Come to think of it, what is the point of having 2 options for track counts for the same number of DSP chips anyhow? I've never been really clear on that. ___ Nathan Rosenberg Music Production The Doghouse NYC www.doghouseNYC.com > -----Original Message----- > From: logic-tdm@yahoogroups.com [mailto:logic-tdm@yahoogroups.com] On > Behalf Of ativity2003 > Sent: Monday, October 23, 2006 12:55 PM > To: logic-tdm@yahoogroups.com > Subject: Re: [L-TDM] DAE Driver Prefs not retaining in L7.2.3 > > Yes, tossed prefs and repaired every step of the way..even zapped > pram..this DAE pref thing is a Logic bug I think..I submitted on > apple. At leat I got it down to using only 2 dsps and my previous > sessions will now open. > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > > > Very weird. I'm just going to assume you've tried fixing permissions > > and tossing prefs? > > > > bd > > > > On Oct 23, 2006, at 7:46 AM, ativity2003 wrote: > > > > > A couple of times I thought that might be the case..but now it opens > > > and closes properly, just won't retain 64 tracks..I did get it to > > > stick at 96 tracks 2DSPs..weird.. > > > > > > > > > > > > > > > > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@> wrote: > > >> > > >> After you set the prefs in Logic. Do you quit and reopen logic > > >> immediately? Di the prefs stick? Is it possible that you set the > > >> prefs, then at some point logic is crashing and that's causing it to > > >> ignore your changes? Just a thought. > > > > ________________________________________________________________________ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L-TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/search > Yahoo! Groups Links > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.408 / Virus Database: 268.13.10/491 - Release Date: > 10/23/2006 > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.14/502 - Release Date: 10/27/2006