Today I've installed protools 7.1cs4 and logic 7.2. When I try to use Audiosuite (preview and process) in Logic I got the message: "Error while trying to synchronize Audio and MIDI. Sample rate 488056 (or another samplerate: 1500001, 8736044...) recognized. Check conflict between Logic Pro and external device. Then I have no more audio and ESB anymore. My interfaces give no input/output signal anymore and I need to restart Logic Pro. It takes also about 40 seconds to shut down my Logic Pro. Is this normal? Any ideas? Wim Claes G5 dual 2,7 ghz, OSX 10.4.3, HD3 Accel, 192, 96, 2x96i, PT 7.1cs4, Logic 7.2

Hi I am reporting the results of these experiments.... The remove-audio-path method worked successfully but it's clusmy. When recording on tracks above 33, when I removed the audio path and then enabled record, I was asked to name the file. No problem. But then every time, I had to go back through that same process. Tracks under 33 work correctly with the regular set-audio-record-path method, so I decided on a simpler workaround. Now for recording tracks above 33, I am reserving three tracks below 33 for use as recording tracks only - track 30 (set to mono) and 31-32 (set to a stereo pair). I use them to record as needed, then after recording, I move the resulting regions to the tracks where I want them to reside, or I change the track reference on the arrange page as needed. This way, I get the file name correct and don't have to return to the audio window to rename the files after recording when using tracks above 33. Frustrating either way, seems like it would be a simple bug to fix. Maybe it will work better in Logic 9! Thanks again for your advise on this. - Dave > --- In logic-tdm@yahoogroups.com, David Gordon <music-pro@...> wrote: >> >> Thank you to Alar, Mark and Markus for your replies to my inquiry. >> >> As Markus mentioned, this did indeed start happening when I used >> tracks 33 & above, it was working fine with lower numbered tracks. >> >> I will try the remove-audio-path suggestion and report the results. >> >> - Dave >> >> >> >> >> >> On Feb 1, 2006, at 2:03 AM, markus enochson wrote: >> >>> i get that problem when using track 33 plus. >>> >>> 1-32 works fine >>> >>> i thinks its a know bug >>> >>> m >>> >>> 31 jan 2006 kl. 07.22 skrev David Gordon: >>> >>>> Recently, Logic and DAE have been ignoring my record path settings >>>> and recording audio tracks directly to the same folder that has the >>>> Logic song file in it. >>>> >>>> The good news is, the recording is working just fine... but it's in >>>> the wrong place and I have to move the files after they are >>>> recorded. >>>> >>>> I recall some discussions about this issue but did not find them >>>> searching the archive... would someone remind me the story about >>>> this? >>>> >>>> Thanks! >>>> - Dave >>>> >>>> Logic 7.1, PT 6.9, OSX 10.3.8, dual 1G, 1.5G RAM >>>> >>>> >>> >>> > >

Hi All, THESE <http://legativity.com/logicfolder.png>; started showing up in my logic work folder. Can't fihure out how to not view them. Thanks for any help Mark

Me too. It's been driving me crazy. I think it is a permissions thing but I'm not sure. Do you have multiple user accounts? best, Nathan ___ Nathan Rosenberg Music Production The Doghouse NYC www.doghouseNYC.com

Those files should be invisible. Google to find a download of the utility called Tinkertool (I think it's free). With it you can set the Finder to show or hide invisible files. Sometimes those settings get wacky and need to be tweaked.... I have no idea why. - Dave On Feb 21, 2006, at 7:45 PM, The Doghouse NYC wrote: > Me too. It's been driving me crazy. I think it is a permissions > thing but > I'm not sure. Do you have multiple user accounts? > > best, Nathan > ___ > Nathan Rosenberg > Music Production > > The Doghouse NYC > www.doghouseNYC.com > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > > > > >

Does anyone have a working system on a g4. I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools 7.1 cs 4. I keep getting a -6004 error "can't acquire hardware" The drive has been zero'd and everything is a fresh install.Logic works fine under core audio and Tools works perfectly. I have come to the conclusion it just hasn't been tested by anyone and there is an incompatability with it. Any ideas?

the only idea I have off the top is to make sure that in your "Audio Midi Setup" utility, the Default output and the System output are both set to built in and not Digi Core. Also, try disabling Core Audio Drive in Logic, and use only the DAE to test it is working. If you have the Core Audio Driver set to DigiHW, it may be interfering with the DAE engine. b On Feb 22, 2006, at 11:08 AM, nokternal1000 wrote: > Does anyone have a working system on a g4. > I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools 7.1 > cs 4. I keep getting a > -6004 error "can't acquire hardware" The drive has been zero'd and > everything is a fresh > install.Logic works fine under core audio and Tools works > perfectly. I have come to the > conclusion it just hasn't been tested by anyone and there is an > incompatability with it. Any > ideas? > > > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > > > > >

I'm on Logic 6.4.3, OSX 10.3.7, G4 933, HD Accel3. (Currently demoing EchoBoy and Eventide bundle and McDSP Synthesizer One.) I get the following message on startup: "Error -12345 while trying to set plug-in setup. Checksum error. Setup data probably damaged." Any thoughts? Thanks, Hakan

If Digi HW was taking control of the sound manager it would just disable DAE on boot up, This is as if the interface or cable is broken. I only used core audio to check if Logic was working as you can clearly see the HW panel load when it has control. --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@...> wrote: > > the only idea I have off the top is to make sure that in your "Audio > Midi Setup" utility, the Default output and the System output are > both set to built in and not Digi Core. > > Also, try disabling Core Audio Drive in Logic, and use only the DAE > to test it is working. If you have the Core Audio Driver set to > DigiHW, it may be interfering with the DAE engine. > > b > > On Feb 22, 2006, at 11:08 AM, nokternal1000 wrote: > > > Does anyone have a working system on a g4. > > I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools 7.1 > > cs 4. I keep getting a > > -6004 error "can't acquire hardware" The drive has been zero'd and > > everything is a fresh > > install.Logic works fine under core audio and Tools works > > perfectly. I have come to the > > conclusion it just hasn't been tested by anyone and there is an > > incompatability with it. Any > > ideas?

"nokternal1000" <j.spier@virgin.net> wrote: >I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools >7.1 cs 4. I keep getting a -6004 error "can't acquire hardware" >The drive has been zero'd and everything is a fresh install.Logic >works fine under core audio and Tools works perfectly. Before you boot up Logic, check the AudioMIDI setup application and make sure that the Digi hardware is NOT selected in either input nor output. Sometimes, you have to select Digi, and then select Internal to kind of wake it up. "nokternal1000" <j.spier@virgin.net> wrote: >..it just hasn't been tested by anyone How do you know this? Your rig is indeed not a common one so perhaps your exact config hadn't been tested. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

Hi Håkan, Have you tried taking the plugs out one by one to see if there´s any change? Soundtoys have had issues when their plugins reside in the Soundtoys folder inside the Digidesign plugins folder. They´re working on a fix for it, although they can´t reproduce the problem themselves. As I understand it Logic can´t find the ST plugins preset folders. A workaround is starting up ProTools first, quitting it and opening Logic afterwards. I´d start by taking Echoboy out of the ST folder if that´s where it is now. It worked flawlessly out of the folder for me ´til I got the bundle. All the best /E G5 2x1,8, 4GB RAM, OSX 10.4.2, HD Accel3, PT 6.9.3cs2, L7.1.1 _______________________________ Erik Häusler Future Love Productions AB mob. +46 708 650 550 erik@futurelove.se 22 feb 2006 kl. 22.59 skrev drpopkit: > I'm on Logic 6.4.3, OSX 10.3.7, G4 933, HD Accel3. > (Currently demoing EchoBoy and Eventide bundle and McDSP > Synthesizer One.) > I get the following message on startup: > > "Error -12345 while trying to set plug-in setup. > Checksum error. Setup data probably damaged." > > Any thoughts? > > Thanks, > Hakan > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > > > > > >

--- In logic-tdm@yahoogroups.com, "f-erenc szabo" <zerobeat@...> wrote: > > "nokternal1000" <j.spier@...> wrote: > >I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools > >7.1 cs 4. I keep getting a -6004 error "can't acquire hardware" > >The drive has been zero'd and everything is a fresh install.Logic > >works fine under core audio and Tools works perfectly. > > Before you boot up Logic, check the AudioMIDI setup > application and make sure that the Digi hardware is NOT > selected in either input nor output. Sometimes, you have > to select Digi, and then select Internal to kind of wake it > up. > > "nokternal1000" <j.spier@...> wrote: > >..it just hasn't been tested by anyone > > How do you know this? Your rig is indeed not a > common one so perhaps your exact config hadn't > been tested. > > > > f-erenc szabo, smarty pants > Z+E+R+O+B+E+A+T > "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" > <http://home.goodmedia.com/~zerobeat> > > > > > > Well give me a configuration that you think will work. You cant get higher than Logic 7.2 and that requires 7.1 cs4 (which is the highest PT7 revision that is specified as the version to work with logic 7.2)to work on any system. And there are only 2 OS variations above 10.4.3 available and none of them work so it brings me back to my original question, Does anyone have a working 7.2 g4 system

--- In logic-tdm@yahoogroups.com, Erik Häusler <erik@...> wrote: > A workaround is starting up ProTools first, quitting it and opening > Logic afterwards. I´d start by taking Echoboy out of the ST folder if > that´s where it is now. It worked flawlessly out of the folder for me > ´til I got the bundle. Thanks Erik! I tried your tips but it still behaves weird. In PT, no prob. In my Autoload I get those error messages, but can still use EchoBoy. When I try to open it in another song that I'm working on at the moment I get more errors and it refuses to open... What version of Logic are you on? I'm on 6.4.3, waiting for 7.2 to arrive, maybe that works better. Best Regards, Hakan

If Echoboy is already out of the Soundtoys folder I´d try opening PT first, instanciating it, then open the Logic song document directly instead of opening Autoload first. Best /E G5 2x1,8, 4GB RAM, OSX 10.4.2, HD Accel3, PT 6.9.3cs2, L7.1.1 _______________________________ Erik Häusler Future Love Productions AB mob. +46 708 650 550 erik@futurelove.se 23 feb 2006 kl. 09.34 skrev drpopkit: >> A workaround is starting up ProTools first, quitting it and opening >> Logic afterwards. I´d start by taking Echoboy out of the ST folder if >> that´s where it is now. It worked flawlessly out of the folder for me >> ´til I got the bundle. >> > > Thanks Erik! > I tried your tips but it still behaves weird. > In PT, no prob. > In my Autoload I get those error messages, but can still use EchoBoy. > When I try to open it in another song that I'm working on at the > moment I get more errors > and it refuses to open... > What version of Logic are you on? > I'm on 6.4.3, waiting for 7.2 to arrive, maybe that works better. > > Best Regards, > Hakan

Ya - I have it working fine on a MDD G41GHZ. 2 GB Ram. OSX 10.4.3 , Logic 7.2, PT 7.1cs4. Ainslie > anyone have a working 7.2 g4 system >

> If Echoboy is already out of the Soundtoys folder I´d try opening PT > first, instanciating it, then open the Logic song document directly > instead of opening Autoload first. > > Best > > /E Tried that without success, thanks anyway! I'll let you know if I find out what's causing this... Hakan

I have a MDD 1Ghz G4 with 7.2 , HD3 Accel-PT 7.1 cs4 and OSX 10.4.5 ... There are a couple of issues ... I have problems with olders songs on automation (I have the Mackie Control) the Mackie loses his outputting capacities but still reads the recorded automation ... The transport buttons freeze and so do the faders. The clean Autoload plays fine though ! I tried copying my files from the old arrangement to the new updating the environments etc .. But no luck, I couldn't transfer the automation ! I had to move to another hdd with 7.1.1 and PT 6.9.3 to finish my work .. Which also reminds me I had another issue recording on those songs .. Trying to record audio would take me to the default audio location window all the time ... Result, I can't record audio on old songs ! This incompatibility with "old" songs is scaring me ... I hate to say it but I feel I'm drifting towards Pro Tools for serious stuff :-( Paul Mazzolini MD pm@softworks.it http://www.softworks.it > > From: "nokternal1000" <j.spier@virgin.net> > Subject: Re: Logic 7.2 on a G4 > > --- In logic-tdm@yahoogroups.com, "f-erenc szabo" <zerobeat@...> wrote: >> >> "nokternal1000" <j.spier@...> wrote: >>> I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools >>> 7.1 cs 4. I keep getting a -6004 error "can't acquire hardware" >>> The drive has been zero'd and everything is a fresh install.Logic >>> works fine under core audio and Tools works perfectly. >> >> Before you boot up Logic, check the AudioMIDI setup >> application and make sure that the Digi hardware is NOT >> selected in either input nor output. Sometimes, you have >> to select Digi, and then select Internal to kind of wake it >> up. >> >> "nokternal1000" <j.spier@...> wrote: >>> ..it just hasn't been tested by anyone >> >> How do you know this? Your rig is indeed not a >> common one so perhaps your exact config hadn't >> been tested. >> >> >> >> f-erenc szabo, smarty pants >> Z+E+R+O+B+E+A+T >> "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" >> <http://home.goodmedia.com/~zerobeat> >> >> >> >> >> >> > Well give me a configuration that you think will work. You cant get higher > than Logic 7.2 > and that requires 7.1 cs4 (which is the highest PT7 revision that is specified > as the version > to work with logic 7.2)to work on any system. And there are only 2 OS > variations above > 10.4.3 available and none of them work so it brings me back to my original > question, Does > anyone have a working 7.2 g4 system

I know this isn't the typical type of message posted in this group, so I'll keep this brief. I have been using Logic for over 10 years and have been a loyal member of the Logic-related Yahoo groups. I recorded an album project that was done entirely in Logic Pro, and I need someone to mix the project in Logic. I am looking for someone that has experience mixing record-label projects, and that has their own home studio suitable for mixing, because my budget for mixing the whole CD is about 2-3K. I have done a lot of editing, cleaning up and rough mixing myself, so the project is in a much-better-than-average place to begin mixing. However, I still need someone with industry experience to give everything that radio-quality "sheen" and make the project sound balanced on all types of speakers. A feel for hip-hop beats and what's currently playing in urban radio would be a plus. The project is R&B/Pop/Gospel in style. Please contact me at eddieproducer@comcast.net if you're interested in talking further. Thanks!

hi hakan - feeling your pain w/ the plug problem. i recently updated my rig from os9 MIX to osX HD, and it takes some time getting everything to work well together. i've had specific issues with both the soundtoys stuff and the syn1 (though not the eventide..always wondered about possibly purchasing that....) as well as a few other plugs. as for the echoboy, the soundtoys issues have been documented on this forum. soundtoys is working on it, but it's probably more of an apple issue per se. i have it working, but only if the plugs are opened first in the initial autoload. if i immediately open another song WITHOUT first opening echoboy,phasemistress,crystallizer, et al in the autoload, they refuse to instantiate in the new song. that's the best i could get it, and a lot seems to depend on WHERE the plugs live. experimenting with moving each/any of them in and out of their "soundtoys" folder may find one that does the trick. with syn1, it used to not instantiate until a recent upgrade of my apple "pro app support" file. now it works fine. besides what's been offered already, try the following... -repair permissions (of course) -make sure you've got the correct "pro application support" file (for your os) downloaded from the apple site -trashing your logic prefs (i'm sure you've tried that old trick already) -rebuilding your autoload from scratch (it takes a second, but it's worked once or twice for me in the past on weird tdm/dae behavior when all else has failed) --- In logic-tdm@yahoogroups.com, "drpopkit" <hakan.glante@...> wrote: > > > If Echoboy is already out of the Soundtoys folder I´d try opening PT > > first, instanciating it, then open the Logic song document directly > > instead of opening Autoload first. > > > > Best > > > > /E > > Tried that without success, thanks anyway! > I'll let you know if I find out what's causing this... > > Hakan >

I work more and more in protools for similar reasons. Logic is very very unpredictable for me with regards to automation. I know this doesn't help anything .. but I needed to vent. Thanks for listening. --- In logic-tdm@yahoogroups.com, Paul Mazzolini <pm@...> wrote: > > I have a MDD 1Ghz G4 with 7.2 , HD3 Accel-PT 7.1 cs4 and OSX 10.4.5 ... > There are a couple of issues ... > I have problems with olders songs on automation (I have the Mackie Control) > the Mackie loses his outputting capacities but still reads the recorded > automation ... The transport buttons freeze and so do the faders. > The clean Autoload plays fine though ! > I tried copying my files from the old arrangement to the new updating the > environments etc .. But no luck, I couldn't transfer the automation ! > I had to move to another hdd with 7.1.1 and PT 6.9.3 to finish my work .. > Which also reminds me I had another issue recording on those songs .. > Trying to record audio would take me to the default audio location window > all the time ... Result, I can't record audio on old songs ! > This incompatibility with "old" songs is scaring me ... I hate to say it but > I feel I'm drifting towards Pro Tools for serious stuff :-( > > Paul Mazzolini > MD > > pm@... > http://www.softworks.it > > > > > From: "nokternal1000" <j.spier@...> > > Subject: Re: Logic 7.2 on a G4 > > > > --- In logic-tdm@yahoogroups.com, "f-erenc szabo" <zerobeat@> wrote: > >> > >> "nokternal1000" <j.spier@> wrote: > >>> I have a G4 MF dual 867, HD2 Acell, OS 10.4.3 ,Logic 7.2 ,Tools > >>> 7.1 cs 4. I keep getting a -6004 error "can't acquire hardware" > >>> The drive has been zero'd and everything is a fresh install.Logic > >>> works fine under core audio and Tools works perfectly. > >> > >> Before you boot up Logic, check the AudioMIDI setup > >> application and make sure that the Digi hardware is NOT > >> selected in either input nor output. Sometimes, you have > >> to select Digi, and then select Internal to kind of wake it > >> up. > >> > >> "nokternal1000" <j.spier@> wrote: > >>> ..it just hasn't been tested by anyone > >> > >> How do you know this? Your rig is indeed not a > >> common one so perhaps your exact config hadn't > >> been tested. > >> > >> > >> > >> f-erenc szabo, smarty pants > >> Z+E+R+O+B+E+A+T > >> "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" > >> <http://home.goodmedia.com/~zerobeat> > >> > >> > >> > >> > >> > >> > > Well give me a configuration that you think will work. You cant get higher > > than Logic 7.2 > > and that requires 7.1 cs4 (which is the highest PT7 revision that is specified > > as the version > > to work with logic 7.2)to work on any system. And there are only 2 OS > > variations above > > 10.4.3 available and none of them work so it brings me back to my original > > question, Does > > anyone have a working 7.2 g4 system >

When I realized the difference between track based automation, and region base automation, and how they will fight with each other if both used, all my automation issue went away. Now when I mix a track, I check for what the client was using, and ultimately convert all region based automation to track based automation. I mixed an entire record recently doing this and didn't have any problems specifically with automation functionality. Best, Bob

Hi, I have been reading the forum for a while now. The time has come for me to address some issues with Logic and TDM. I assist a composer that has been using Logic-TDM for years. Though is hard to reproduce the different type of crashes that we experience (up to 20 times a day), there is some sort of consistency. Hopefully you might have some tips. We are using a dual 2.5Ghz G5 with 10.4.3 and 4GB RAM. Logic 7.1.1 and 192 HD. I have rebuilt the autoload MANY times and followed some advice from prior postings to troubleshoot some of the possible bugs or related problems with TDM-Logic systems. I'm crashing while changing from one session to another consistently. I can't isolate the issue, but everytime I close a session and open a prior one I crash. Trying to reopen Logic will produce a Kernel panic. Another crash often occurs while recording. A window will appear telling me that logic has a problem synchronizing audio and midi and asks me to exit. The truth is that I actually can't hit exit: the program continues recording but the software is frozen. Is someone having this sort of problem? We've never previously had a latency problem but out of the blue we recently are experiencing a delay while monitoring. Any idea? How could I trouble shoot from Logic? Thank you so much for your help. victor

I installed Logic 7.2 on an HD rig with OSX 10.43 and PT7.1cs4 and it crashes if ESB is in the PlugIns folder. The ESB that is in there is version 2.01. If I try to re-install from the Logic 7.2 DVD, the install for ESB is greyed out. Can somebody please check the version of their working ESB with Logic7.2 and PT7, and email it to me if it's higher than 2.01? It's a small file.... less than half a MB. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

I tried the latest version of each WaveShell with Logic 7.2 and ProTools 7.1cs4 and it always crashes Logic upon bootup (right when the WaveShell gets accessed during DAE launch). The AU version works fine (that's the one that usually doesn't work, but this time I got their "hotfix AU" version that works fine). ProTools 7.1cs4 boots up just fine with the WaveShells. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

Thanks for the quick response and file! It's indeed a later version than mine (2.01 versus 2.1), but it still crashes Logic 7.2 in the same way. I can't get the 7.2 DVD to install ESB (it's greyed out). I only have the Stereomixer plugin and ESB (just to eliminate the possibility that it could be another plugin, plus to speed up boot times when testing). f-erenc Bob DeMaa <bobdemaa@mac.com> writes: >I had to disable the Emagic HTDMEnabledInstrumentsOSX plug-in to keep >PT from crashing on startup. > >My ESB is version 2.1 I've enclosed here should it help. > >best, > >Bob > >On Feb 24, 2006, at 6:47 PM, f-erenc szabo wrote: > >> I installed Logic 7.2 on an HD rig with OSX 10.43 and PT7.1cs4 and >> it crashes if ESB is in the PlugIns folder. The ESB that is in there >> is version 2.01. If I try to re-install from the Logic 7.2 DVD, the >> install for ESB is greyed out. >> >> Can somebody please check the version of their working ESB with >> Logic7.2 and PT7, and email it to me if it's higher than 2.01? >> It's a small file.... less than half a MB > > >> .