Here are two identical files to switch between. http://www.freeclyde.com/tim/logic_test_files.sit I can't load them more than 3 times without a crash. Thanks in advance for the help. TIm --- In logic-tdm@yahoogroups.com, "yeehaanow" <yeehaanow@y...> wrote: > > > We've had a pretty good size logic/TDM system running very smoothly for over a year... > except for one thing. We can only open one file before it crashes. > > This week I've done some exhaustive testing and found no solutions that work. > > > If anyone could do this simple test, which wouldn't take but 10 minutes I would be > eternally grateful: > > > Build an environment with 32 stereo input channels, 16 stereo aux channels, 8 stereo aux > channels with ESX instantiated on them, and 32 Audio tracks. Make the output of > everything "surround". On each fader, (inputs, exs, and audio tracks) make two stereo > sends, (a bus 1-2 and a bus 3-4). The level of the sends doesn't matter. Now save the file > as #1 and another copy as #2. > > Here's the test. Open #1, then open #2, (closing #1) then open #1, and 2, and back and > forth until logic (un)expectedly quits. Hopefully it will never crash and you will be my hero > and savior. Let's see who can get the most loads, and what their setup is. > > > I'll post a file that people can try loading if it makes it easier. > > > HD3 > Dual 2.5 G5 > > > > > Thanks, Tim >

> Am hoping - finally - to install my RME Digiface in the coming weeks > so I can hardware lightpipe into ProTools (thereby eliminating > DTDM/ESB from my setup). Hi Erik, I'm on 10.4.2 with Logic 7.1.1 and Protools 6.9.3cs3 and it is very stable at the moment. I have not had a crash for a few weeks now. But... I;ve been working mostly on rock projects the last month- using very few DTDM objects, although DTDM is still enabled. > > This will be as good a time as any to do a clean reinstall of my > entire system, and upgrade to Tiger while I'm at it (am currently on > 10.3.8, Logic 7.1.1, ProTools 6.9). With this setup, things are > actually fairly stable - BUT, about 20-30% of the time Logic will > crash when opening a session. This does seem to be related to the > presence of ESB objects in my autoload (the problem was MUCH worse > when I had ESB aux objects assigned to all 8 ESB sends - much better > now with only one stereo pair enabled, but I still get crash-on-open > with 20-30% frequency). > > So - can anyone comment on their experiences with overall stability > running under Tiger vs. Panther as it pertains to the Logic TDM > situation? Will I be better served in the long run to do this? Or > is 10.3.8/7.1.1/6.9 still the "magic" combo? Given my well documented problems earlier last year I am pretty happy with Logic TDM at the moment. The above combination is pretty cool. I had a an RME Multiface- it was great but I sold it a few years ago and stayed with Logic TDM/ESB James

Rebuilding the template (autoload) from scratch solved the problem. --- In logic-tdm@yahoogroups.com, "yeehaanow" <yeehaanow@y...> wrote: > > Anyone while using the "goto" command to go to bar 1 or 2, and -8 thru 0 it goes instead > to just AFTER the bar? (0.1.2 > > Very annoying because it won't click that beat, making 3 beats instead of 4 in the first > measure. >

Hi, I have problems to get my advc 100 back to work with OS X 10.3 and 10.4. It once worked wthout problems back in 10.2. Canopus support told me to reinstall quicktime to quicktime 7.0.1 (it was 7.0.4 before) Any help appreciated... Regards Mark -- Mark Ziebarth Mühlenkamp 12 d 22303 Hamburg Telefon: ++494027800926 (Studio) ++491733135456 (mobil) ++494065055216 (Fax)

hi all recently installed the Garritan Personal Orchestra v.2 and the kontact player works fine when running natively. however, when i try to run more than 2 instruments under DTDM logic crashes. anybody experienced this or know if this is a problem with the kontact instrument or maybe it happens with other instruments? any help appreciated as theres not much orchestration to be done with just a piano and a violin! cheers rory dual 2Gig G5, 2Gig RAM, 10.3.9, HD2, Logic 7.1.1,

The Apple info page doesn't mention RTAS which I assume to mean that it won't be supported. But it does say ,"Logic Pro 7.2 is fully compatible with the Pro Tools 7.1 version of DAE. All features are supported..." So maybe that means RTAS plugs will be available on DAE tracks? Did anyone see Apple at NAMM and inquire about this?

I read about it here on Yahoo's Logic-TDM Forum. I went for it and it works!! I just purchased a Mix "Cubed" i.e. Mix Plus Core Card and 2 Farm Cards. I read Logic Pro 7's TDM guide, and about Logics ESB1 and EXSTDM, and DTDM(Direct TDM) and how you can use Logics AU plugins, virtual instruments and PowerCore's with ESB1 (Logic Pro's TDM Bridge). I purchased a used ATTO UL3D SCSI card that's supposedly compatible with Pro Tools and removed my PowerDomain Adaptec 29160. I configured my setup and I'm able to use all of my Audio Unit and most of all my PowerCore plugins and virtual instruments in Pro Tools DAE and TDM. This is the stuff!!! Randy -- In logic-tdm@yahoogroups.com, "Pete Thomas" <pt@p...> wrote: > > I thought I'd already mentioned, I have successfully run TC Powercore on > DTDM with Logic TDM. It does work no probs > > With some reservations (eg why would anyone want to do this?) If you are > running logic and TDM you could just get TC works TDM which has the extra > Master X 5 and Intonator. > > best regards > > Pete Thomas > > www.petethomas.co.uk > ----- Original Message ----- > From: Peter Duemmler <merlin@m...> > To: <logic-tdm@yahoogroups.com> > Sent: Thursday, January 31, 2002 4:58 PM > Subject: Re: [L-TDM] powercore and protools >

Hi all, I had to exchange my third HD with all my SoundFiles. I gave the HD the same name as the one before and just copied all my files to the new HD. In order to keep the files and all the informations of my huge SoundBank (for Film Productions) I just copied the PMdata to the LogicPrefs Folder. BUT: Now my ProjectManager doesn't find the files on the new HD. Only when I SCAN again the HD, there are the files again. BUT without the thousands of comments I have written to each file!!! I am totaly lost. I should be possible (maybe with a workaround) to exchange a HD without loosing all the informations of the ProjectManager i have collected in the last years. Help!!! Matthias.

I have a powerbook/002r setup that is "slaved" to my G4/mix3 system. On the powerbook I run Logic express 7.1.1. I would need some advice for how to sync the powerbook/logic sequencer to logic on the G4/mix system. My goal is to use appleloops on the powerbook. Any info would be appreciated. Regards. Henning.

Hi All, First of all I must apologize for a big mistake I made in my original post and possibly mislead people about using the PowerCore with Pro Tools DTDM with Logic 7.1.1.! I discovered that you can only use PowerCore plugins on virtual instruments when you're tracking them or playing them back. So far I haven't been able to record them to audio either. However, I could "Export track as audio file" to DAE which worked fine. But when I tried to playback the audio, which I was able to do, for some reason the virtual instruments became disabled with absolutely no response. Anyone have any experience with this. I've been a native user of Logic for quite some time and had no issues. I really like my PowerCore VSS3, MD3, and Oxford Eq but it looks like if I'm going to stick with Pro Tools I'll have to get a G5 and upgrade to an HD system and get the TDM versions of VSS3 and MD3. Anyone with experience please help. Thanks, Randy --- In logic-tdm@yahoogroups.com, "guitar01_2001" <guitar01_2001@y...> wrote: > > > I read about it here on Yahoo's Logic-TDM Forum. I went for it and it works!! I just > purchased a Mix "Cubed" i.e. Mix Plus Core Card and 2 Farm Cards. I read Logic Pro 7's > TDM guide, and about Logics ESB1 and EXSTDM, and DTDM(Direct TDM) and how you can > use Logics AU plugins, virtual instruments and PowerCore's with ESB1 (Logic Pro's TDM > Bridge). I purchased a used ATTO UL3D SCSI card that's supposedly compatible with Pro > Tools and removed my PowerDomain Adaptec 29160. I configured my setup and I'm able > to use all of my Audio Unit and most of all my PowerCore plugins and virtual instruments > in Pro Tools DAE and TDM. This is the stuff!!! > Randy > > > -- In logic-tdm@yahoogroups.com, "Pete Thomas" <pt@p...> wrote: > > > > I thought I'd already mentioned, I have successfully run TC Powercore on > > DTDM with Logic TDM. It does work no probs > > > > With some reservations (eg why would anyone want to do this?) If you are > > running logic and TDM you could just get TC works TDM which has the extra > > Master X 5 and Intonator. > > > > best regards > > > > Pete Thomas > > > > www.petethomas.co.uk > > ----- Original Message ----- > > From: Peter Duemmler <merlin@m...> > > To: <logic-tdm@yahoogroups.com> > > Sent: Thursday, January 31, 2002 4:58 PM > > Subject: Re: [L-TDM] powercore and protools > > >

Hey guys! I guess you've read the crossgrade announcement, what do you make of this: "Logic Pro 7.2 is fully compatible with the Pro Tools 7.1 version of DAE. All features are supported, including ESB and EXS24TDM. Note that users must install an updated Digidesign Stream Manager framework library file, which is downloadable from the Digidesign support website." Now, I can't find a trace of this "Digidesign Stream Manager framework library file" anywhere on digi's support pages. Would anyone speculate? Will I first have to wait for the Logic 7.2 update and then wait for digi to post their framework file? You guys think it will be somewhat a simultaneous release? I've heard rumours about LP7.2 being the final "safe" PT compatble update....OS9 days! We'll see. TIA, Erik

From Apple's website: "Logic Pro 7.2 is fully compatible with the Pro Tools 7.1 version of DAE. All features are supported, including ESB and EXS24TDM. Note that users must install an updated Digidesign Stream Manager framework library file, which is downloadable from the Digidesign support website." "godmouth1965" <eriksojdelius@bredband.net> wrote: >I can't find a trace of this "Digidesign Stream Manager framework >library file" anywhere on digi's support pages. Logic 7.2 isn't even released yet, so it doesn't matter that this Digidesign file also isn't released yet. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

> Logic 7.2 isn't even released yet, so it doesn't matter that this > Digidesign file also isn't released yet. > f-erenc szabo, smarty pants I know it doesn't matter, I was just looking for some friendly whining or even speculation of how things will play out. You know, we'll get the 7.2 update all exited and then have to wait for that framework forever. Call me the update junkie, I guess. ATB, Erik

Hi All, I've had a nightmare 'day' yesterday. I've been working with the same setup for quite a while without having major problems with midi. I've got quite a big midi setup in which I have 3 x Unitor8 (one of those is an Mk2) connected in cascade to my G5 via USB and another AMT8 which is connected directly to another USB port of the same G5, being further away from the other interfaces. Now, as I said, I've used this setup for a while without any glitches, but yesterday for some reason everything in the midi setup went mad: In the Arrange Window on my Logic7.1.1 I selected the midi instrument I wanted to play, but when I was playing for instance the Voyager, which was selected (connected to the bunch of 3 Unitors) and I moved the cursor to the SE1-X, which is connected to the AMT8, my SE1-X wouldn't play at all. I've created a 1 bar sequence for the Voyager and 1 for the SE1X and only the Voyager would play. While Logic was stopped I was moving with the cursor from one midi instrument to another I had to press stop (even Logic wasn't in play mode) to be able to play the desired instrument otherwise another not selected midi instrument would play. The Arrange Window would show me the right instrument (with the correct Midi Port) but the AMT8 led would flash according to the instrument I was hearing. I've tried everything I know, from checking the Audio Midi Setup on the OSX (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and reconnect the Midi interfaces, shutdown everything, ... finally I installed the USB Driver from the Emagic Logic Pro6 CD and it seemed to work (at least for a while). I still don't know what could have caused this, since I didn't install anything new, nor downloaded some strange plugs that might get in conflict. I'm not quite sure that this was the right solution, since even after the USB Driver Installation I still had the same funny behavior after a while. Any help would be very much appreciated Sven

Hi Sven, I had some problems like you, two years ago. I have two Unitors and one AMT8 and I had all of them connectet to an USB hub. With the time I got more and more Midi-errors. The answer: You have to cascade them all together (like in the manual), otherwise OSX isn't able to recognize which one where is. So, buy another RS422 (if I remember it right) cable and try it again. Since 2 years there are no problems left with it after doing so... Regards and success, Axel Am 30.01.2006 um 09:02 schrieb Musique Non Stop: > Hi All, > > I've had a nightmare 'day' yesterday. I've been working with the > same setup > for quite a while without having major problems with midi. > > I've got quite a big midi setup in which I have 3 x Unitor8 (one of > those is > an Mk2) connected in cascade to my G5 via USB and another AMT8 > which is > connected directly to another USB port of the same G5, being > further away > from the other interfaces. > > Now, as I said, I've used this setup for a while without any > glitches, but > yesterday for some reason everything in the midi setup went mad: > > In the Arrange Window on my Logic7.1.1 I selected the midi > instrument I > wanted to play, but when I was playing for instance the Voyager, > which was > selected (connected to the bunch of 3 Unitors) and I moved the > cursor to the > SE1-X, which is connected to the AMT8, my SE1-X wouldn't play at > all. I've > created a 1 bar sequence for the Voyager and 1 for the SE1X and > only the > Voyager would play. > > While Logic was stopped I was moving with the cursor from one midi > instrument to another I had to press stop (even Logic wasn't in > play mode) > to be able to play the desired instrument otherwise another not > selected > midi instrument would play. The Arrange Window would show me the right > instrument (with the correct Midi Port) but the AMT8 led would flash > according to the instrument I was hearing. > > I've tried everything I know, from checking the Audio Midi Setup on > the OSX > (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and > reconnect the Midi interfaces, shutdown everything, ... finally I > installed > the USB Driver from the Emagic Logic Pro6 CD and it seemed to work > (at least > for a while). I still don't know what could have caused this, since > I didn't > install anything new, nor downloaded some strange plugs that might > get in > conflict. I'm not quite sure that this was the right solution, > since even > after the USB Driver Installation I still had the same funny > behavior after > a while. > > Any help would be very much appreciated > > Sven > > > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > > > >

Hi Sven, does that include cutting the power and restarting the damn thing? At times upon autoloading my midi tells me that this interface or that isn´t available (mainly software routings that I´ve configured). Restarting sets the record straight. It just goes a little crazy sometimes, don´t we all? They can´t go out for a beer, so I can´t really blame them... Guess there could be something wrong with your USB cable too. Suppose you´ve tweaked the connectors a bit already. Maybe there´s a point to cascading all of your interfaces together? BTW I´m not sure how well that Audio Midi setup thing works. I must admit to using an Autoload that was conceived way back that´s just been finetuned since. But still, Autoload complains that there´s no such thing as a Unitor8 interface connected. Which is true, I´ve got an amt8 connected instead. I´ve told and configured Audio MIDI Setup properly but I get the same message everytime I start up Logic anyway. It works flawlessly, so it´s not worth going through the pain of reconfiguring the whole thing from scratch. All the best /E 2x1.8, 4Gb RAM, OSX 10.4.2,HD Accel 3, PT 6.9.3cs2, L7.1.1 _______________________________ Erik Häusler Future Love Productions AB erik@futurelove.se 30 jan 2006 kl. 09.02 skrev Musique Non Stop: > 've tried everything I know, from checking the Audio Midi Setup on > the OSX > (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and > reconnect the Midi interfaces, shutdown everything, ...

Hi Axel, Many thanks for your advice. The only thing that bugs me is that the AMT8 is quite far away from the 3 Unitors. Is there a maximum length that I can use for a RS422 cable? Best regards, Sven -----Original Message----- From: logic-tdm@yahoogroups.com [mailto:logic-tdm@yahoogroups.com] On Behalf Of axel Sent: 30 January 2006 10:25 To: logic-tdm@yahoogroups.com Subject: Re: [L-TDM] AMT8 - Unitor8 Mk2 Problem?? Hi Sven, I had some problems like you, two years ago. I have two Unitors and one AMT8 and I had all of them connectet to an USB hub. With the time I got more and more Midi-errors. The answer: You have to cascade them all together (like in the manual), otherwise OSX isn't able to recognize which one where is. So, buy another RS422 (if I remember it right) cable and try it again. Since 2 years there are no problems left with it after doing so... Regards and success, Axel Am 30.01.2006 um 09:02 schrieb Musique Non Stop: > Hi All, > > I've had a nightmare 'day' yesterday. I've been working with the > same setup > for quite a while without having major problems with midi. > > I've got quite a big midi setup in which I have 3 x Unitor8 (one of > those is > an Mk2) connected in cascade to my G5 via USB and another AMT8 > which is > connected directly to another USB port of the same G5, being > further away > from the other interfaces. > > Now, as I said, I've used this setup for a while without any > glitches, but > yesterday for some reason everything in the midi setup went mad: > > In the Arrange Window on my Logic7.1.1 I selected the midi > instrument I > wanted to play, but when I was playing for instance the Voyager, > which was > selected (connected to the bunch of 3 Unitors) and I moved the > cursor to the > SE1-X, which is connected to the AMT8, my SE1-X wouldn't play at > all. I've > created a 1 bar sequence for the Voyager and 1 for the SE1X and > only the > Voyager would play. > > While Logic was stopped I was moving with the cursor from one midi > instrument to another I had to press stop (even Logic wasn't in > play mode) > to be able to play the desired instrument otherwise another not > selected > midi instrument would play. The Arrange Window would show me the right > instrument (with the correct Midi Port) but the AMT8 led would flash > according to the instrument I was hearing. > > I've tried everything I know, from checking the Audio Midi Setup on > the OSX > (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and > reconnect the Midi interfaces, shutdown everything, ... finally I > installed > the USB Driver from the Emagic Logic Pro6 CD and it seemed to work > (at least > for a while). I still don't know what could have caused this, since > I didn't > install anything new, nor downloaded some strange plugs that might > get in > conflict. I'm not quite sure that this was the right solution, > since even > after the USB Driver Installation I still had the same funny > behavior after > a while. > > Any help would be very much appreciated > > Sven

Hi Erik, Yep, I've tried everything and I never got the problem that it wouldn't recognize the Interfaces. I've also tried with another USB cable, with no success. I guess that cascading all 4 interfaces together should do the trick, but the distance between those bugs me. Best regards, Sven -----Original Message----- From: logic-tdm@yahoogroups.com [mailto:logic-tdm@yahoogroups.com] On Behalf Of Erik Häusler Sent: 30 January 2006 10:32 To: logic-tdm@yahoogroups.com Subject: Re: [L-TDM] AMT8 - Unitor8 Mk2 Problem?? Hi Sven, does that include cutting the power and restarting the damn thing? At times upon autoloading my midi tells me that this interface or that isn´t available (mainly software routings that I´ve configured). Restarting sets the record straight. It just goes a little crazy sometimes, don´t we all? They can´t go out for a beer, so I can´t really blame them... Guess there could be something wrong with your USB cable too. Suppose you´ve tweaked the connectors a bit already. Maybe there´s a point to cascading all of your interfaces together? BTW I´m not sure how well that Audio Midi setup thing works. I must admit to using an Autoload that was conceived way back that´s just been finetuned since. But still, Autoload complains that there´s no such thing as a Unitor8 interface connected. Which is true, I´ve got an amt8 connected instead. I´ve told and configured Audio MIDI Setup properly but I get the same message everytime I start up Logic anyway. It works flawlessly, so it´s not worth going through the pain of reconfiguring the whole thing from scratch. All the best /E 2x1.8, 4Gb RAM, OSX 10.4.2,HD Accel 3, PT 6.9.3cs2, L7.1.1 _______________________________ Erik Häusler Future Love Productions AB erik@futurelove.se 30 jan 2006 kl. 09.02 skrev Musique Non Stop: > 've tried everything I know, from checking the Audio Midi Setup on > the OSX > (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and > reconnect the Midi interfaces, shutdown everything, ...

On the speculation tip; ....will be interesting to see how ESB works now, more channels across the NATIVE to DAE bridge would be useful here. W

<will@willslater.co.uk> wrote: > more channels across the NATIVE to DAE bridge would be useful here. Everything is the same (in DAE and DTDM and ESB), minus the ability to instanicate HTDM plugins on DAE tracks. So, Logic 7.2 has some new features to be sure, but none of them are in the world of DAE/ESB - and in fact there is one major feature missing (thanks to Digidesign abandoning HTDM). So there is no way at all to instanciate any kind of native plugin on a DAE track in Logic 7.2. Not HTDM. Not RTAS. Not AU. And since Logic 7.2 is for Tiger only, it can't be used with MIX hardware. All ProTools6 functionality has been removed from Logic 7.2. This means that Logic 7.2 requires ProTools 7 to work with HD hardware via DAE. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

Why does EXS24 still work on TDM auxes then? Peter --- http://www.merlinsound.de Am 30.01.2006 um 16:26 schrieb f-erenc szabo: > <will@willslater.co.uk> wrote: >> more channels across the NATIVE to DAE bridge would be useful here. > > > Everything is the same (in DAE and DTDM and ESB), minus > the ability to instanicate HTDM plugins on DAE tracks. > > So, Logic 7.2 has some new features to be sure, but none > of them are in the world of DAE/ESB - and in fact there is one > major feature missing (thanks to Digidesign abandoning HTDM). > > So there is no way at all to instanciate any kind of native plugin > on a DAE track in Logic 7.2. Not HTDM. Not RTAS. Not AU. > > And since Logic 7.2 is for Tiger only, it can't be used > with MIX hardware. > > All ProTools6 functionality has been removed from Logic 7.2. > This means that Logic 7.2 requires ProTools 7 to work with > HD hardware via DAE.

Hi, I don't think so, but I don't know it. I have about 3 m from the first to second, and then about 30cm between the second and third Interface. So that is not really far away. Let us know how far and if it solves your problem as it does for me... Regards, Axel Am 30.01.2006 um 11:10 schrieb Musique Non Stop: > Hi Axel, > > Many thanks for your advice. The only thing that bugs me is that > the AMT8 is > quite far away from the 3 Unitors. Is there a maximum length that I > can use > for a RS422 cable? > > Best regards, > > Sven > > -----Original Message----- > From: logic-tdm@yahoogroups.com [mailto:logic-tdm@yahoogroups.com] > On Behalf > Of axel > Sent: 30 January 2006 10:25 > To: logic-tdm@yahoogroups.com > Subject: Re: [L-TDM] AMT8 - Unitor8 Mk2 Problem?? > > Hi Sven, > > I had some problems like you, two years ago. I have two Unitors and > one AMT8 and I had all of them connectet to an USB hub. With the time > I got more and more Midi-errors. > > The answer: You have to cascade them all together (like in the > manual), otherwise OSX isn't able to recognize which one where is. > So, buy another RS422 (if I remember it right) cable and try it again. > > Since 2 years there are no problems left with it after doing so... > > > Regards and success, > > Axel > > > Am 30.01.2006 um 09:02 schrieb Musique Non Stop: > >> Hi All, >> >> I've had a nightmare 'day' yesterday. I've been working with the >> same setup >> for quite a while without having major problems with midi. >> >> I've got quite a big midi setup in which I have 3 x Unitor8 (one of >> those is >> an Mk2) connected in cascade to my G5 via USB and another AMT8 >> which is >> connected directly to another USB port of the same G5, being >> further away >> from the other interfaces. >> >> Now, as I said, I've used this setup for a while without any >> glitches, but >> yesterday for some reason everything in the midi setup went mad: >> >> In the Arrange Window on my Logic7.1.1 I selected the midi >> instrument I >> wanted to play, but when I was playing for instance the Voyager, >> which was >> selected (connected to the bunch of 3 Unitors) and I moved the >> cursor to the >> SE1-X, which is connected to the AMT8, my SE1-X wouldn't play at >> all. I've >> created a 1 bar sequence for the Voyager and 1 for the SE1X and >> only the >> Voyager would play. >> >> While Logic was stopped I was moving with the cursor from one midi >> instrument to another I had to press stop (even Logic wasn't in >> play mode) >> to be able to play the desired instrument otherwise another not >> selected >> midi instrument would play. The Arrange Window would show me the >> right >> instrument (with the correct Midi Port) but the AMT8 led would flash >> according to the instrument I was hearing. >> >> I've tried everything I know, from checking the Audio Midi Setup on >> the OSX >> (I'm running OSX 10.3.9) to the Assistant in Logic, to disconnect and >> reconnect the Midi interfaces, shutdown everything, ... finally I >> installed >> the USB Driver from the Emagic Logic Pro6 CD and it seemed to work >> (at least >> for a while). I still don't know what could have caused this, since >> I didn't >> install anything new, nor downloaded some strange plugs that might >> get in >> conflict. I'm not quite sure that this was the right solution, >> since even >> after the USB Driver Installation I still had the same funny >> behavior after >> a while. >> >> Any help would be very much appreciated >> >> Sven > > > > > ______________________________________________________________________ > __ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > > > >

Hi f-erenc, How do you know this? Do you have other sources than the info on the Apple site you referred to earlier? "Logic Pro 7.2 is fully compatible with the Pro Tools 7.1 version of DAE. All features are supported, including ESB and EXS24TDM. 'All features' is a bit cryptic here - it could mean 'all relevant Pro Tools features' (which would include RTAS) or it could mean 'all features previously available in Logic Pro's TDM support' At least, that's how I read it, so to me there's no conclusive evidence on RTAS not being present in 7.2 in this text. Am I wrong? Or just too optimistic? Regards, Ivo > So there is no way at all to instanciate any kind of native plugin > on a DAE track in Logic 7.2. Not HTDM. Not RTAS. Not AU.

From: "shadowboxnyc" <shadowboxnyc@yahoo.com> > The Apple info page doesn't mention RTAS which I assume to mean > that it won't be > supported. But it does say ,"Logic Pro 7.2 is fully compatible > with the Pro Tools 7.1 version > of DAE. All features are supported..." So maybe that means RTAS > plugs will be available on > DAE tracks? > > Did anyone see Apple at NAMM and inquire about this? RTAS will never be supported in Logic. It's only for the Pro Tools software. Nick Batzdorf, editor/publisher Virtual Instruments Magazine - the world of softsynths and samplers www.Virtualinstrumentsmag.com 1-877 VImagzn (846-2496) 818/905-9101, cell 590-9101

Hi Axel, I think about 4-5m. Since the cables provided are not that long, do you recon that I can use any other serial Mac cable of my old Mac 8100? BTW, since you are very found of Emagic's Midi interfaces, I've just purchased second hand another Unitor 8 Mk2. Strangely it has written Unitor 8 (without the Mk2), but it looks identical to an Mk2, having the USB port as well (obviously) as the serial ports (Mac+PC) and on the serial number's sticker it say 'Unitor 8Mk2 Rev2' If I cascade it with my AMT8, Audio Midi Setup sees it without any problems, but by connecting it via USB, there is no way that the System Profiler in OSX recognizes it. Any suggestion? Best regards, Sven -----Original Message----- From: logic-tdm@yahoogroups.com [mailto:logic-tdm@yahoogroups.com] On Behalf Of axel Sent: 30 January 2006 16:37 To: logic-tdm@yahoogroups.com Subject: Re: [L-TDM] AMT8 - Unitor8 Mk2 Problem?? Hi, I don't think so, but I don't know it. I have about 3 m from the first to second, and then about 30cm between the second and third Interface. So that is not really far away. Let us know how far and if it solves your problem as it does for me... Regards, Axel Am 30.01.2006 um 11:10 schrieb Musique Non Stop: > Hi Axel, > > Many thanks for your advice. The only thing that bugs me is that > the AMT8 is > quite far away from the 3 Unitors. Is there a maximum length that I > can use > for a RS422 cable? > > Best regards, > > Sven >