He he...maybe we should set up a virtual exorcist division. How about "Ghost In The Machine Busters"? /Erik

>I haven't read anything new about Logic Pro+Tiger on TDM. >I'd love to switch to Tiger like in my native setup, but I heard of a >lot of people with serious problems after the upgrade. >It's adviceable or not? >My setup is G5 dual 2,5 ghz, 4,5 GB ram, OSX 10.3.8, HD3+192+96i I/O, >FW800 external drive, Pro Tools 6.7, Logic Pro 7.1 >Thanks in advance for any input:-) Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have to remember to do is to download and install the Apple Pro Application Support software. Most likely, the people you've heard from who are having problems haven't done this. Lee Blaske

<axel@...> > - To get my Midi-Enviroment into Logic: Is it fast enough to use a > Input-Object or is it really impossible so I have to use a hardware > mixer to get a few Keyboards into my arrange? I work with a 128K buffer. To put that in perspective, if I listen to the no-latency mixer on my MOTU PCI-424 card and simultaneously to the signal coming back from Logic, the two comb filter. The extra handful of ms will bother some people, but it really doesn't matter to me. > - AFAIK are there a lot people outside which are running ProTools and > Logic simultaneously. I don't want to sync them. With CoreAudio I am > able to bounce offline and export all tracks offline and separately > to audio and import that to PT. Anything about that? Is a G5 Dual 2.0 > fast enough to handle that? Off-line bouncing slows down to accommodate the processing power it has available, so any machine is fast enough to handle that. That aside, yes, the 2 x 2 is plenty fast - although I'd recommend looking for an older one that can take 8GB of RAM rather than 4GB...and as a matter of fact, you can probably find a 2 x 2.5 for very little more, and it's probably worth it. Nick Batzdorf, editor/publisher Virtual Instruments magazine - the world of softsynths and samplers www.Virtualinstrumentsmag.com 1-877 VImagzn (846-2496) 818/905-9101, cell 590-9101

You're absolutely right Lee, after installing the Pro support package for Tiger I don't have any problems at all with PT, and no more than the usual stuff with Logic. cheers Alar --- In logic-tdm@yahoogroups.com, Lee Blaske <lblaske@p...> wrote: > >I haven't read anything new about Logic Pro+Tiger on TDM. > >I'd love to switch to Tiger like in my native setup, but I heard of a > >lot of people with serious problems after the upgrade. > >It's adviceable or not? > >My setup is G5 dual 2,5 ghz, 4,5 GB ram, OSX 10.3.8, HD3+192+96i I/O, > >FW800 external drive, Pro Tools 6.7, Logic Pro 7.1 > >Thanks in advance for any input:-) > > > Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have > to remember to do is to download and install the Apple Pro > Application Support software. Most likely, the people you've heard > from who are having problems haven't done this. > > Lee Blaske

Thanks guys: sound reassuring..:-) I think that the first day off i'll go brave too and go for it.. Just another question: did you do a fresh install or just updated Panther? I have a lot of authorizations on my hd and it would be a pain to install and reauthorize everything. Native Instruments suggest to update and so I did on my home G5 without noticeable problems.. Thanks again Fabio Il giorno 27/ago/05, alle ore 00:38, Alar Suurna ha scritto: > You're absolutely right Lee, after installing the Pro support package > for Tiger I don't have any problems at all with PT, > and no more than the usual stuff with Logic. > > cheers > Alar > > > > --- In logic-tdm@yahoogroups.com, Lee Blaske <lblaske@p...> wrote: > >>> >> >> >> Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have >> to remember to do is to download and install the Apple Pro >> Application Support software. Most likely, the people you've heard >> from who are having problems haven't done this. >> >> Lee Blaske >> > >

Update worked fine for me. Alar -- In logic-tdm@yahoogroups.com, Fabio <opal.arts@t...> wrote: > Thanks guys: sound reassuring..:-) > I think that the first day off i'll go brave too and go for it.. > Just another question: > did you do a fresh install or just updated Panther? I have a lot of > authorizations on my hd and it would be a pain to install and > reauthorize everything. > Native Instruments suggest to update and so I did on my home G5 > without noticeable problems.. > > Thanks again > > Fabio > Il giorno 27/ago/05, alle ore 00:38, Alar Suurna ha scritto: > > > You're absolutely right Lee, after installing the Pro support package > > for Tiger I don't have any problems at all with PT, > > and no more than the usual stuff with Logic. > > > > cheers > > Alar > > > > > > > > --- In logic-tdm@yahoogroups.com, Lee Blaske <lblaske@p...> wrote: > > > >>> > >> > >> > >> Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have > >> to remember to do is to download and install the Apple Pro > >> Application Support software. Most likely, the people you've heard > >> from who are having problems haven't done this. > >> > >> Lee Blaske > >> > > > >

Hi Lee Any idea what the program does? Boe Larsen > Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have > to remember to do is to download and install the Apple Pro > Application Support software. Most likely, the people you've heard > from who are having problems haven't done this. > > Lee Blaske

Hi there! Can I use my HD 1 card and my 96 I/O for the LOGIC PRO 7? Cuz I'm now thinking to transfer my owrk onto Logic....but I like the HD sound..so plz let me know asap...thanks alot! JOSH

Good stuff, Lee. Question: You do have the "greyed out TDM DSP Usage" issue still, right? TIA, Erik >> I haven't read anything new about Logic Pro+Tiger on TDM. >> I'd love to switch to Tiger like in my native setup, but I heard of a >> lot of people with serious problems after the upgrade. >> It's adviceable or not? >> My setup is G5 dual 2,5 ghz, 4,5 GB ram, OSX 10.3.8, HD3+192+96i I/O, >> FW800 external drive, Pro Tools 6.7, Logic Pro 7.1 >> Thanks in advance for any input:-) > > > Works fine here with)S 10.4.2 and PT 6.9.3cs1. The one thing you have > to remember to do is to download and install the Apple Pro > Application Support software. Most likely, the people you've heard > from who are having problems haven't done this. > > Lee Blaske >

In a message dated 8/28/05 4:08:20 PM, ichenshi@... writes: > Hi there! > > Can I use my HD 1 card and my 96 I/O for the LOGIC PRO 7? > Cuz I'm now thinking to transfer my owrk onto Logic....but I like the HD > sound..so plz let me > know asap...thanks alot! > > JOSH > Sure can if you own PT software. Read ther getting started with Logic/TDM guide. Pete Church

>Hi Lee > >Any idea what the program does? No, not at all. Lee Blaske

I believe it´s there to help Logic integrate better with the other heavy Apple applications such as FinalCut Pro, DVD Studio Pro etc. Best /E G5 2x1,8, 4GB RAM, OSX 10.3.9, HD Accel3, PT 6.9, L7.1 _______________________________ Erik Häusler Future Love Productions AB mob. +46 708 650 550 erik@... 2005-08-29 kl. 17.30 skrev Lee Blaske: >> Hi Lee >> >> Any idea what the program does? > > No, not at all. > > Lee Blaske > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > >

Hey Josh, Yes you can, read about it here: http://manuals.info.apple.com/en/LogicPro7_TDMGuide.pdf ATB, Erik > Hi there! > > Can I use my HD 1 card and my 96 I/O for the LOGIC PRO 7? > Cuz I'm now thinking to transfer my owrk onto Logic....but I like the HD > sound..so plz let me > know asap...thanks alot! >

Hi all, had something weird happen today. I normally have the mac av auxed into logic TDM mixer so I can monitor other applications- I use to be able to happily switch between applications and hear all the audio from core audio applications. Suddenly i cannot hear anything when not actually in Logic. If I switch to Logic all the core audio applications are heard fine- it is as though the core audio apps are muted when not in Logic. Why dos this happen? TIA James

any ideas why less than 50% of audio files on my hard drive will audition in logic? thanks Amory. G4 dual 1.25 10.4 pt 6.9.2 7.1

Hey Fellers, So, I'm trying to figure out how to get Stylus RMX to output more than one stereo set. It would seem that it should work like BFD, with the outputs showing up in the list of input sources... I want to be able to print the Stylus tracks to audio (CoreAudio, in this case) in one pass, rather than the slow one at a time method. Am I missing something? -brian

Sorry for being obvious but have you checked for different bitrate & frequency? /Erik > any ideas why less than 50% of audio files on my hard drive will audition in > logic? > > thanks Amory. > > G4 dual 1.25 > 10.4 > pt 6.9.2 > 7.1

Hi Josh, a caution here mate. I had a HD1 96io combo for ages and I've always been a logic user. HD1 and logic is a PITA due to the number of dsp slots (9 from memory) and the fact that the HD engine will take at least 1 and the ESB stream mixer will take at least 1 also. If you want a high track count then you will lose 4 dsps at least without instantiating any plugins. I defnintely recommend updating to HD2 Accel or higher. (I am HD2 accel now- I sometime run out of DSP slots) The ESB is not the most stable thing in the world. I found myself disabling the ESB after bouncing any native (like instruments) channels and importing into TDM mixer. Also, Logic TDM does not handle interleaved channels- you will use double the screen space. Spectrasonics plugins seem prone to distortions with the ESB/TDM combo also. All that aside- it all works fine- make sure you disable the Core Audio driver. jr > Hi there! > > Can I use my HD 1 card and my 96 I/O for the LOGIC PRO 7? > Cuz I'm now thinking to transfer my owrk onto Logic....but I like the HD sound..so plz let me > know asap...thanks alot! > > JOSH

"amory_leader" <amory_leader@...> wrote: >any ideas why less than 50% of audio files on my hard drive will audition >in logic? DAE can't handle stereo interleaved files. You're probably also using either DTDM or CoreAudio, so you'll need to change the "DEV" setting in the Audio Window or Sample Editor. This assigns the audition path's engine. DTDM and CoreAudio can handle stereo interleaved. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

I have been using Logic for a few months now, and while I am pretty much getting used to all its quirks I still notice a few things that I think are bugs. Today I was editing a project and I was trying to snip bars 2 through 4 so I set the snap menu to bars and it wouldn't let me select from beat 1 of bar 2 (or any other bar) it kept snapping to 1.4.241, 2.4.241, etc. I tried beat but it did the same thing (1.4.241, 2.1.241, etc.) I quit and restarted and no luck. Opened up a new project and it worked fine. Was there some hidden preference that I clicked by accident? Also, when ever I try to adjust the SMPTE offset it doesn't always work. It seems to work the first time I set up a project but if I try to adjust it later it doesn't work. For example I set a movie's start time so that bar 1 is 1:00:00:00. If I later want to make beat 0.4.1 the start start at 1:00:00:00 I will go to the synchronization window and try to enter it. But after I enter it will change to some seemingly arbitrary bar like 0.3.261. if I keep hitting return while the beat entry field is highlighted it seems to cycle through a series of beats (0.3.261, 1.4.261, -3.2.261). Is this a known bug? When I bought Logic, Apple had recently released 7.1. But there haven't been any bug releases since then?

As far as the sync window, it is buggy for me. Set your timecode/bar settings in the Tempo List Editor instead. Same thing, way easier. Mark --- In logic-tdm@yahoogroups.com, "shadowboxnyc" <shadowboxnyc@y...> wrote: > I have been using Logic for a few months now, and while I am pretty much getting used to > all its quirks I still notice a few things that I think are bugs. > > Today I was editing a project and I was trying to snip bars 2 through 4 so I set the snap > menu to bars and it wouldn't let me select from beat 1 of bar 2 (or any other bar) it kept > snapping to 1.4.241, 2.4.241, etc. I tried beat but it did the same thing (1.4.241, 2.1.241, > etc.) I quit and restarted and no luck. Opened up a new project and it worked fine. Was > there some hidden preference that I clicked by accident? > > Also, when ever I try to adjust the SMPTE offset it doesn't always work. It seems to work > the first time I set up a project but if I try to adjust it later it doesn't work. For example I > set a movie's start time so that bar 1 is 1:00:00:00. If I later want to make beat 0.4.1 the > start start at 1:00:00:00 I will go to the synchronization window and try to enter it. But > after I enter it will change to some seemingly arbitrary bar like 0.3.261. if I keep hitting > return while the beat entry field is highlighted it seems to cycle through a series of beats > (0.3.261, 1.4.261, -3.2.261). Is this a known bug? > > When I bought Logic, Apple had recently released 7.1. But there haven't been any bug > releases since then?

Just my 2 cents too. I was tipped off to this by a friend of mine with a large HD rig and Logic,I use it on my MIX system with logic. Instead of using ESB and DTDM purchase a Motu 828 or other fire wire audio interface with an ADAT output. Use Core audio instead of DTDM (do not use the digi core audio driver, its not necessary and unstable). Have all of your native instruments and tracks bus into your protools/Dae environment level by running out the MOTU 828 and back into the adat input of your Digi interface (you get 4 stereo buses). Altough this sounds convoluted and will involve throwing down $700 for the MOTU its worth its weight in gold for the eradication of DTDM inconsistencies and gain more DSP from your Digi cards. Try it! MATT

Seems like my sync menu timecode window remains cursor active after hitting return. So if I enter the start time and then try to click into the transport to see the results of my move, the location I selected into the transport gets entered into the bar 1 destination. Try closint the sync window immediately. MATT

thanks f-erenc. i'm aware of that already actually. i always have DTDM selected in the audio window so i'm not sure why this is still happening. am i the only one who continually has this problem? i really assumed this would be a more common complaint. any more ideas? Amory. --- In logic-tdm@yahoogroups.com, "f-erenc szabo" <zerobeat@g...> wrote: > "amory_leader" <amory_leader@h...> wrote: > >any ideas why less than 50% of audio files on my hard drive will audition > >in logic? > > DAE can't handle stereo interleaved files. You're probably also > using either DTDM or CoreAudio, so you'll need to change the > "DEV" setting in the Audio Window or Sample Editor. This > assigns the audition path's engine. > > DTDM and CoreAudio can handle stereo interleaved. > > > > > f-erenc szabo, smarty pants > Z+E+R+O+B+E+A+T > "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" > <http://home.goodmedia.com/~zerobeat> > > > > >

Ok, here goes: Open a multichannel instance of RMX, choose your loops/sounds on different channels in RMX, go to the mixer section in RMX, choose your stereo outs from A to H in RMX. Now, create DTDM AUX's to recive from RMX multiple outs. Output A will be recieved by the DTDM instrument object you instanciated RMX on, by default. Output B through H will be represented as RMX 3-16 in your AUX's input slots. From here you can bus your AUX's to DAE inputs via the ESB bridge and record. ATB, Erik > Hey Fellers, > > So, I'm trying to figure out how to get Stylus RMX to output more > than one stereo set. It would seem that it should work like BFD, with > the outputs showing up in the list of input sources... > > I want to be able to print the Stylus tracks to audio (CoreAudio, in > this case) in one pass, rather than the slow one at a time method. > > Am I missing something? > > -brian