What version of Digi Core audio drivers is installed? it should work. Set your sound output pref to digi try opening the digi core audio app prior to launching itunes. _b. On Feb 24, 2005, at 12:30 PM, Paul Mazzolini wrote: > > Since I've upgraded to HD3 and to Pro Tools 6.7 I don't seem to be > able to > use my Digi hardware for Coreaudio, I mean, I can select Digidesign HW > (HD) > in the Audio Midi Setup as default output instead of Built-in Audio > but no > sound comes out from my 192 ??? > I would have loved to listen to my iTunes through my Digi system but > can't > .. > > Any known issues ? > I have a DP 1 Ghz G4 .. > > > Paul Mazzolini > MD > > pm@... > http://www.softworks.it > > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

What version of GR pro Tools and logic. are you using. All was fine until I went to 7.1 and GR1.2.0.004 I'm using PT6.7 GR works fine there. but I go back to logic no go except as a DTDM plug in. Go figure. On Feb 24, 2005, at 4:17 PM, logic-tdm@yahoogroups.com wrote: > Message: 10 > Date: Thu, 24 Feb 2005 10:41:08 -0800 > From: Bob DeMaa <bobdemaa@...> > Subject: Re: Re:ESB TDM + AU plugins > > Thanks for the heads up, I'll keep an eye out for BFD, and for using > any of these together. Although I've been using Trilogy and BFD often > together and they seem fine. > > GR does indeed work on a DAE track in Logic for me. But for some > strange reason, I couldn't get it to work correctly until I opened it > up and got it working in Pro Tools. Then when i went back to logic and > tried, it worked perfectly. There was also some strange issue with the > tuner in GR. Things seemed to get better for me after deleting the > tuner out of the signal path. > > _b. > > On Feb 24, 2005, at 4:51 AM, jake holmes wrote: > >> >> I would like to add to the list of suspect plug ins BFD and Trilogy >> and >> RMX. I can't get much stability when two of these plug ins are running >> together. Has anyone heard if the Guitar Rig up date is out yet. NI >> said that they were aware of the problems with GR and ESB. They >> promised a fix. I haven't heard anything as of yet. From this post >> some >> of you seem to be able to use GR in DAE? It's totally useless for me. >> I >> can use it as a plug in in DTDM, no input. >> >> G5 dual >> 7.1 >> OS10.3.8 >> Jake >> >> On Feb 23, 2005, at 4:19 PM, logic-tdm@yahoogroups.com wrote: >> >>>

Hi I'm using logic Pro 6 with a 24 mix Protools I got the Audio tracks working but I can't open Audio Instrument tracks I'm choose DAE + TDM in the hardware & audio settings Can somebody help me? Thank you

> From: Bob DeMaa <bobdemaa@...> > Subject: Re: Dae Coraudio and Pro Tools 6.7 drivers > > What version of Digi Core audio drivers is installed? it should work. > > Set your sound output pref to digi > > try opening the digi core audio app prior to launching itunes. > > _b. > > On Feb 24, 2005, at 12:30 PM, Paul Mazzolini wrote: > >> >> Since I've upgraded to HD3 and to Pro Tools 6.7 I don't seem to be >> able to >> use my Digi hardware for Coreaudio, I mean, I can select Digidesign HW >> (HD) >> in the Audio Midi Setup as default output instead of Built-in Audio >> but no >> sound comes out from my 192 ??? >> I would have loved to listen to my iTunes through my Digi system but >> can't >> .. >> >> Any known issues ? >> I have a DP 1 Ghz G4 .. >> >> >> Paul Mazzolini Yeah ! That did it !! Will I have to launch the Digi Core Audi Manager each time ? Paul Mazzolini MD pm@... http://www.softworks.it

"Yeah ! That did it !! Will I have to launch the Digi Core Audi Manager each time ?" This seems to be erratic, most of the times iTunes starts the driver but sometimes not. Be good, Erik

In case anyone fancies it... Digital Village in the UK are currently organising a group-buy on East West Quantum Leap Symphonic Orchestra Gold. If 60 people buy in the price drops to £276 + VAT For anyone who missed the deal in the US before Christmas, this looks a good deal. Jon -- Jon Cotton Artisan Music Lab music production and string arranging T: +44 (0) 121 249 0598 F; +44 (0) 709 214 8920 M: +44 (0) 774 701 2208 http://www.artisanmusiclab.com http://www.stringarranging.com http://www.artisanaudio.com

On 23.02.2005, at 20:31 Uhr, jsdog22 wrote: > As per Digi FAQ suggested--turned off journaling on my audio drive > (you DO > have to erase it to do this with Disk Uti;lity) No, you can toggle journaling with Apples Disk Utility, just choose the disk and press Apple-J (it's under the File Menu) > Logic's DAE/DTDM template song has it set to - > 3dB, with pre-roll checked. I would leave it there, it should do anything in terms of performance or disk errors. It probably defaults to -3db, cause this is the closest to TDM 's Pan Law, which is -2,5db, So this way you'll have almost the same behaviour for DAE Tracks (-2,5 fixed) and for Native (-3, changeable from within Logic) Good to hear, that you found out, that Norton was causing your problems, getting rid of it will also help you to avoid a lot of other problems. AFAIR, Norton stopped development of their tools for Macs (or at least for the new Tiger) Louis

How much is Symphonic Orch Gold usually? Is it a good Instrument? How much is this in US dollars? Thanks Greg Critchley greg@... www.gregcritchley.com ----- Original Message ----- From: "Jon Cotton" <jon.sunflower@...> To: <logic-tdm@yahoogroups.com> Sent: Friday, February 25, 2005 4:51 AM Subject: [L-TDM] UK group-buy on EWQLSO Gold In case anyone fancies it... Digital Village in the UK are currently organising a group-buy on East West Quantum Leap Symphonic Orchestra Gold. If 60 people buy in the price drops to £276 + VAT For anyone who missed the deal in the US before Christmas, this looks a good deal. Jon -- Jon Cotton Artisan Music Lab music production and string arranging T: +44 (0) 121 249 0598 F; +44 (0) 709 214 8920 M: +44 (0) 774 701 2208 http://www.artisanmusiclab.com http://www.stringarranging.com http://www.artisanaudio.com Yahoo! Groups Links

No, just the first time. I've noticed this too. On Feb 25, 2005, at 1:48 AM, Paul Mazzolini wrote: > >> From: Bob DeMaa <bobdemaa@...> >> Subject: Re: Dae Coraudio and Pro Tools 6.7 drivers >> >> What version of Digi Core audio drivers is installed? it should work. >> >> Set your sound output pref to digi >> >> try opening the digi core audio app prior to launching itunes. >> >> _b. >> >> On Feb 24, 2005, at 12:30 PM, Paul Mazzolini wrote: >> >>> >>> Since I've upgraded to HD3 and to Pro Tools 6.7 I don't seem to be >>> able to >>> use my Digi hardware for Coreaudio, I mean, I can select Digidesign >>> HW >>> (HD) >>> in the Audio Midi Setup as default output instead of Built-in Audio >>> but no >>> sound comes out from my 192 ??? >>> I would have loved to listen to my iTunes through my Digi system but >>> can't >>> .. >>> >>> Any known issues ? >>> I have a DP 1 Ghz G4 .. >>> >>> >>> Paul Mazzolini > Yeah ! That did it !! > Will I have to launch the Digi Core Audi Manager each time ? > > Paul Mazzolini > MD > > pm@... > http://www.softworks.it > > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

Thanks again for the heads up. last night I successfully ran Logic 7.1 in OS X 10.3.8 with the DAE and ESB for almost 2 hours straight (then I got tired and stopped working) on a dual 2 G5. It was flawless and IMHO worked as good if not better than I remember from the Logic 6 days. (of course I have a short memory) It seems the trick to the success was in pulling all the Spectrasonics plug-ins. In this case it was Atmosphere, Trilogy and Stylus. After this it was smooth sailing, I was even using BFD and Guitar Rig as AU on the DTDM side without a single hitch. And... I actually had fun not crashing Logic. Was a beautiful thing. All the other soft synths seem to work just fine. Korg, GMedia, Native instruments, Yellow Tools, I should also mention the only BFD plug-in I loaded was the Stereo one. I disabled the other 2. BTW, if you don't know about AudioUnit Manager from Granted Software, you need to go get this immediately. I need to do more testing with the Spectrasonics stuff. i really love Stylus RMX. I think the main culprit was Atmosphere, followed by Trilogy, or perhaps it was using more than one spectrasonic plug-in at a time, or in conjunction with BFD. (as per your post yesterday) Versions are OS X 10.3.8 Logic 7.01 GR - I'm not entirely sure. I think it was the 1.2 fuzz update, but not the 1.2 version released last week. PT 6.7cs8 In logic, on a Mono DAE Track, I choose the Mono to Stereo Gtr Rig. Try deleting the tuner from the Gtr Rig signal path. After I did GR worked fine. B On Feb 24, 2005, at 6:57 PM, jake holmes wrote: > > What version of GR > pro Tools and logic. are you using. All was fine until I went to 7.1 > and GR1.2.0.004 I'm using PT6.7 GR works fine there. but I go back to > logic no go except as a DTDM plug in. Go figure. > On Feb 24, 2005, at 4:17 PM, logic-tdm@yahoogroups.com wrote: > >> Message: 10 >> Date: Thu, 24 Feb 2005 10:41:08 -0800 >> From: Bob DeMaa <bobdemaa@...> >> Subject: Re: Re:ESB TDM + AU plugins >> >> Thanks for the heads up, I'll keep an eye out for BFD, and for using >> any of these together. Although I've been using Trilogy and BFD often >> together and they seem fine. >> >> GR does indeed work on a DAE track in Logic for me. But for some >> strange reason, I couldn't get it to work correctly until I opened it >> up and got it working in Pro Tools. Then when i went back to logic and >> tried, it worked perfectly. There was also some strange issue with >> the >> tuner in GR. Things seemed to get better for me after deleting the >> tuner out of the signal path. >> >> _b. >> >> On Feb 24, 2005, at 4:51 AM, jake holmes wrote: >> >>> >>> I would like to add to the list of suspect plug ins BFD and Trilogy >>> and >>> RMX. I can't get much stability when two of these plug ins are >>> running >>> together. Has anyone heard if the Guitar Rig up date is out yet. NI >>> said that they were aware of the problems with GR and ESB. They >>> promised a fix. I haven't heard anything as of yet. From this post >>> some >>> of you seem to be able to use GR in DAE? It's totally useless for me. >>> I >>> can use it as a plug in in DTDM, no input. >>> >>> G5 dual >>> 7.1 >>> OS10.3.8 >>> Jake >>> >>> On Feb 23, 2005, at 4:19 PM, logic-tdm@yahoogroups.com wrote: >>> >>>> > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

good to know yours is running well. Atmosphere performed better when I put it's .dat file on an Sata drive (instead of firewire).Atmo wasn't crashing the system as much as lots of popping & clicking. Better now. Don't know your drive setup, but that worked for me. G52.0 OS10.3.7 L7.0.1 PT6.7cs5 Mark --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@m...> wrote: > Thanks again for the heads up. > > last night I successfully ran Logic 7.1 in OS X 10.3.8 with the DAE and > ESB for almost 2 hours straight (then I got tired and stopped working) > on a dual 2 G5. It was flawless and IMHO worked as good if not better > than I remember from the Logic 6 days. (of course I have a short > memory) > > It seems the trick to the success was in pulling all the Spectrasonics > plug-ins. In this case it was Atmosphere, Trilogy and Stylus. After > this it was smooth sailing, I was even using BFD and Guitar Rig as AU > on the DTDM side without a single hitch. > > And... I actually had fun not crashing Logic. Was a beautiful thing. > > > All the other soft synths seem to work just fine. Korg, GMedia, Native > instruments, Yellow Tools, I should also mention the only BFD plug-in > I loaded was the Stereo one. I disabled the other 2. > > BTW, if you don't know about AudioUnit Manager from Granted Software, > you need to go get this immediately. > > I need to do more testing with the Spectrasonics stuff. i really love > Stylus RMX. I think the main culprit was Atmosphere, followed by > Trilogy, or perhaps it was using more than one spectrasonic plug-in at > a time, or in conjunction with BFD. (as per your post yesterday) > > Versions are > OS X 10.3.8 > Logic 7.01 > GR - I'm not entirely sure. I think it was the 1.2 fuzz update, but not > the 1.2 version released last week. > PT 6.7cs8 > > In logic, on a Mono DAE Track, I choose the Mono to Stereo Gtr Rig. > Try deleting the tuner from the Gtr Rig signal path. After I did GR > worked fine. > > B > > On Feb 24, 2005, at 6:57 PM, jake holmes wrote: > > > > > What version of GR > > pro Tools and logic. are you using. All was fine until I went to 7.1 > > and GR1.2.0.004 I'm using PT6.7 GR works fine there. but I go back to > > logic no go except as a DTDM plug in. Go figure. > > On Feb 24, 2005, at 4:17 PM, logic-tdm@yahoogroups.com wrote: > > > >> Message: 10 > >> Date: Thu, 24 Feb 2005 10:41:08 -0800 > >> From: Bob DeMaa <bobdemaa@m...> > >> Subject: Re: Re:ESB TDM + AU plugins > >> > >> Thanks for the heads up, I'll keep an eye out for BFD, and for using > >> any of these together. Although I've been using Trilogy and BFD often > >> together and they seem fine. > >> > >> GR does indeed work on a DAE track in Logic for me. But for some > >> strange reason, I couldn't get it to work correctly until I opened it > >> up and got it working in Pro Tools. Then when i went back to logic and > >> tried, it worked perfectly. There was also some strange issue with > >> the > >> tuner in GR. Things seemed to get better for me after deleting the > >> tuner out of the signal path. > >> > >> _b. > >> > >> On Feb 24, 2005, at 4:51 AM, jake holmes wrote: > >> > >>> > >>> I would like to add to the list of suspect plug ins BFD and Trilogy > >>> and > >>> RMX. I can't get much stability when two of these plug ins are > >>> running > >>> together. Has anyone heard if the Guitar Rig up date is out yet. NI > >>> said that they were aware of the problems with GR and ESB. They > >>> promised a fix. I haven't heard anything as of yet. From this post > >>> some > >>> of you seem to be able to use GR in DAE? It's totally useless for me. > >>> I > >>> can use it as a plug in in DTDM, no input. > >>> > >>> G5 dual > >>> 7.1 > >>> OS10.3.8 > >>> Jake > >>> > >>> On Feb 23, 2005, at 4:19 PM, logic-tdm@yahoogroups.com wrote: > >>> > >>>> > > > > > > > > UNSUBSCRIBE: send a blank email to > > logic-tdm-unsubscribe@yahoogroups.com > > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > >

Cool, it's worth a try. I had moved the .dat files off of a firewire as well, but I placed them in the Plug-ins folder on the internal drive. Figured that would be the most direct fast access. We'll try moving them to the Raptor and see if that helps. thanks. b. On Feb 25, 2005, at 12:25 PM, ativity2003 wrote: > > > good to know yours is running well. Atmosphere performed better > when I put it's .dat file on an Sata drive (instead of firewire).Atmo > wasn't > crashing the system as much as lots of popping & clicking. Better now. > Don't > know your drive setup, but that worked for me. > > G52.0 > OS10.3.7 > L7.0.1 > PT6.7cs5 > > Mark > > > > --- In logic-tdm@yahoogroups.com, Bob DeMaa <bobdemaa@m...> wrote: >> Thanks again for the heads up. >> >> last night I successfully ran Logic 7.1 in OS X 10.3.8 with the DAE >> and >> ESB for almost 2 hours straight (then I got tired and stopped working) >> on a dual 2 G5. It was flawless and IMHO worked as good if not better >> than I remember from the Logic 6 days. (of course I have a short >> memory) >> >> It seems the trick to the success was in pulling all the Spectrasonics >> plug-ins. In this case it was Atmosphere, Trilogy and Stylus. After >> this it was smooth sailing, I was even using BFD and Guitar Rig as AU >> on the DTDM side without a single hitch. >> >> And... I actually had fun not crashing Logic. Was a beautiful thing. >> >> >> All the other soft synths seem to work just fine. Korg, GMedia, >> Native >> instruments, Yellow Tools, I should also mention the only BFD plug-in >> I loaded was the Stereo one. I disabled the other 2. >> >> BTW, if you don't know about AudioUnit Manager from Granted Software, >> you need to go get this immediately. >> >> I need to do more testing with the Spectrasonics stuff. i really love >> Stylus RMX. I think the main culprit was Atmosphere, followed by >> Trilogy, or perhaps it was using more than one spectrasonic plug-in at >> a time, or in conjunction with BFD. (as per your post yesterday) >> >> Versions are >> OS X 10.3.8 >> Logic 7.01 >> GR - I'm not entirely sure. I think it was the 1.2 fuzz update, but >> not >> the 1.2 version released last week. >> PT 6.7cs8 >> >> In logic, on a Mono DAE Track, I choose the Mono to Stereo Gtr Rig. >> Try deleting the tuner from the Gtr Rig signal path. After I did GR >> worked fine. >> >> B >> >> On Feb 24, 2005, at 6:57 PM, jake holmes wrote: >> >>> >>> What version of GR >>> pro Tools and logic. are you using. All was fine until I went to 7.1 >>> and GR1.2.0.004 I'm using PT6.7 GR works fine there. but I go back >>> to >>> logic no go except as a DTDM plug in. Go figure. >>> On Feb 24, 2005, at 4:17 PM, logic-tdm@yahoogroups.com wrote: >>> >>>> Message: 10 >>>> Date: Thu, 24 Feb 2005 10:41:08 -0800 >>>> From: Bob DeMaa <bobdemaa@m...> >>>> Subject: Re: Re:ESB TDM + AU plugins >>>> >>>> Thanks for the heads up, I'll keep an eye out for BFD, and for using >>>> any of these together. Although I've been using Trilogy and BFD >>>> often >>>> together and they seem fine. >>>> >>>> GR does indeed work on a DAE track in Logic for me. But for some >>>> strange reason, I couldn't get it to work correctly until I opened >>>> it >>>> up and got it working in Pro Tools. Then when i went back to logic >>>> and >>>> tried, it worked perfectly. There was also some strange issue with >>>> the >>>> tuner in GR. Things seemed to get better for me after deleting the >>>> tuner out of the signal path. >>>> >>>> _b. >>>> >>>> On Feb 24, 2005, at 4:51 AM, jake holmes wrote: >>>> >>>>> >>>>> I would like to add to the list of suspect plug ins BFD and Trilogy >>>>> and >>>>> RMX. I can't get much stability when two of these plug ins are >>>>> running >>>>> together. Has anyone heard if the Guitar Rig up date is out yet. >>>>> NI >>>>> said that they were aware of the problems with GR and ESB. They >>>>> promised a fix. I haven't heard anything as of yet. From this post >>>>> some >>>>> of you seem to be able to use GR in DAE? It's totally useless for >>>>> me. >>>>> I >>>>> can use it as a plug in in DTDM, no input. >>>>> >>>>> G5 dual >>>>> 7.1 >>>>> OS10.3.8 >>>>> Jake >>>>> >>>>> On Feb 23, 2005, at 4:19 PM, logic-tdm@yahoogroups.com wrote: >>>>> >>>>>> >>> >>> >>> >>> UNSUBSCRIBE: send a blank email to >>> logic-tdm-unsubscribe@yahoogroups.com >>> Please email logic-tdm-owner@yahoogroups.com to contact an admin. >>> >>> >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >>> >>> >>> > > > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

i have used factory pitch before on older systems no problem. now with 7 i am trying to pitch a session one track at a time. i have tried at least 4 times on the same track, it shows progress (a long time process too) but wqhen completed there is never a change. anybody experience this? i tried using audiosuite pitch but it sounds really bad. i just need one semitone up.

Hi folks, Recenty, as I've mentioned, Im running BFD drums out of the macs stereo output and its too noisy. When I run Core Audio the Mac lets me select "Digi hardware" for the output but I get no sound at all. Shouldn't I be able to assign output channels of the 192 to coreaudio and ghear sound at the output? Thanks, Lon

No ­ Logic can¹t use the Digi outputs when DAE is using them. You need to use ESB / DTDM to transfer the native output. On 2/25/05 2:19 PM, "Spiritpathpress@..." <Spiritpathpress@...> wrote: > > Hi folks, > > Recenty, as I've mentioned, Im running BFD drums out of the macs stereo > output and its too noisy. When I run Core Audio the Mac lets me select "Digi > hardware" for the output but I get no sound at all. Shouldn't I be able to > assign output channels of the 192 to coreaudio and ghear sound at the output? > Thanks, Lon > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

Yes, you should, but not while the DAE is active in Pro Tools or Logic. if you were to run BFD as a stand-alone, then yes, it should come out of the 192. I'm not completely familiar with the BFD Prefs, but the NI Standalone stuff has preferences where you can select the output. Does this help? B. On Feb 25, 2005, at 2:19 PM, Spiritpathpress@... wrote: > > Hi folks, > > Recenty, as I've mentioned, Im running BFD drums out of the macs > stereo > output and its too noisy. When I run Core Audio the Mac lets me select > "Digi > hardware" for the output but I get no sound at all. Shouldn't I be > able to > assign output channels of the 192 to coreaudio and ghear sound at the > output? > Thanks, Lon > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

Finally getting around to installing some plug-ins. I just upgraded to Waves Gold 5.0 (TDM version). According to the Waves FAQ, this version will work either as a native plug in (I downloaded the latest AU 5.0.1 waveshell), or with DAE (via iLok authorization, I assume). What's the best choice here--is it either/ or, or can I actually authorize Waves for both hosts? Waves claims no sonic difference. Any input would be helpful. Thanks--jsdog22

The install pretty much does everything at once. You get AU, TDM, VST and RTAS all installed at once. As a side note I find that Ableton Live 3 doesn't care much for the VST Waveshell though, so I usually move that out of my VST folder. On Feb 25, 2005, at 3:19 PM, jsdog22 wrote: > > > Finally getting around to installing some plug-ins. I just upgraded to > Waves > Gold 5.0 (TDM version). According to the Waves FAQ, this version will > work > either as a native plug in (I downloaded the latest AU 5.0.1 > waveshell), or with > DAE (via iLok authorization, I assume). What's the best choice > here--is it > either/ or, or can I actually authorize Waves for both hosts? Waves > claims no > sonic difference. Any input would be helpful. Thanks--jsdog22 > > > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

If I select the digi 192 as the interface I can get coreaudio to output over that hardware. However it will not play any other TDM tracks I've selected. is this right? I cannot have coreaudio and TDM working over the 192 simultaneously?

If you are able to use Waves Gold TDM in both Native and TDM, please let me know - I'd like to do the same. My waves gold only shows up in the TDM side, not the native. On Feb 25, 2005, at 3:19 PM, jsdog22 wrote: > > > Finally getting around to installing some plug-ins. I just upgraded to > Waves > Gold 5.0 (TDM version). According to the Waves FAQ, this version will > work > either as a native plug in (I downloaded the latest AU 5.0.1 > waveshell), or with > DAE (via iLok authorization, I assume). What's the best choice > here--is it > either/ or, or can I actually authorize Waves for both hosts? Waves > claims no > sonic difference. Any input would be helpful. Thanks--jsdog22 > > > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

To get it to show up in native you only have to run the gold installer. But, since you are probably referring to not seeing the AU versions perhaps you have the olde AU Waveshell isntalled, go download the Waveshell AU 5.0.1. After installing you should then see the native waves plug ins. B. On Feb 25, 2005, at 4:03 PM, Greg Critchley wrote: > > If you are able to use Waves Gold TDM in both Native and TDM, please > let me know - I'd like to do the same. My waves gold only shows up in > the TDM side, not the native. > > On Feb 25, 2005, at 3:19 PM, jsdog22 wrote: > >> >> >> Finally getting around to installing some plug-ins. I just upgraded to >> Waves >> Gold 5.0 (TDM version). According to the Waves FAQ, this version will >> work >> either as a native plug in (I downloaded the latest AU 5.0.1 >> waveshell), or with >> DAE (via iLok authorization, I assume). What's the best choice >> here--is it >> either/ or, or can I actually authorize Waves for both hosts? Waves >> claims no >> sonic difference. Any input would be helpful. Thanks--jsdog22 >> >> >> >> >> >> UNSUBSCRIBE: send a blank email to >> logic-tdm-unsubscribe@yahoogroups.com >> Please email logic-tdm-owner@yahoogroups.com to contact an admin. >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

Hi Bob, I did as you suggested, and voila! Thanks for that tip, and this forum. i didn' t even know it was possible to use the Waves Gold TDM in the native area, and my soft synths and native Inst will love those plug ins. Thanks On Feb 25, 2005, at 4:07 PM, Bob DeMaa wrote: > > To get it to show up in native you only have to run the gold installer. > But, since you are probably referring to not seeing the AU versions > perhaps you have the olde AU Waveshell isntalled, go download the > Waveshell AU 5.0.1. After installing you should then see the native > waves plug ins. > > B. > > > On Feb 25, 2005, at 4:03 PM, Greg Critchley wrote: > >> >> If you are able to use Waves Gold TDM in both Native and TDM, please >> let me know - I'd like to do the same. My waves gold only shows up in >> the TDM side, not the native. >> >> On Feb 25, 2005, at 3:19 PM, jsdog22 wrote: >> >>> >>> >>> Finally getting around to installing some plug-ins. I just upgraded >>> to >>> Waves >>> Gold 5.0 (TDM version). According to the Waves FAQ, this version will >>> work >>> either as a native plug in (I downloaded the latest AU 5.0.1 >>> waveshell), or with >>> DAE (via iLok authorization, I assume). What's the best choice >>> here--is it >>> either/ or, or can I actually authorize Waves for both hosts? Waves >>> claims no >>> sonic difference. Any input would be helpful. Thanks--jsdog22 >>> >>> >>> >>> >>> >>> UNSUBSCRIBE: send a blank email to >>> logic-tdm-unsubscribe@yahoogroups.com >>> Please email logic-tdm-owner@yahoogroups.com to contact an admin. >>> >>> >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >>> >>> >>> >> >> >> >> UNSUBSCRIBE: send a blank email to >> logic-tdm-unsubscribe@yahoogroups.com >> Please email logic-tdm-owner@yahoogroups.com to contact an admin. >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> > > > > UNSUBSCRIBE: send a blank email to > logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >

Hi, In the manual, Logic 7 users are told that if you drag a green apple loop to an empty instrument, it will open the instrument associated with that loop as well as EQ and other settings. It's a brilliant concept, except on my system it opens the EXS24 with only the test tone loaded. Can anyone help? Thanks Greg DP G4 1.25/Logic7/TDM-MIX PLUS/OXS Panther

"GC" <greg@...> wrote: >In the manual, Logic 7 users are told that if you drag a >green apple loop to an empty instrument, it will open the >instrument associated with that loop as well as EQ and >other settings. It's a brilliant concept, except on my >system it opens the EXS24 with only the test tone loaded. This probably means that the install of Logic7 wasn't done properly. In particular, make sure you have a "Garageband" entry in your EXS24 list of instruments. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

The EXS instruments it uses are the ones in the Garageband library. Those are in the Logic installer somewhere but maybe you did not install them. * Dave On 2/25/05 6:02 PM, "GC" <greg@...> wrote: > > > Hi, > > In the manual, Logic 7 users are told that if you drag a green apple loop to > an empty > instrument, it will open the instrument associated with that loop as well as > EQ and other > settings. It's a brilliant concept, except on my system it opens the EXS24 > with only the test > tone loaded. > > Can anyone help? Thanks > > Greg > > DP G4 1.25/Logic7/TDM-MIX PLUS/OXS Panther > > > > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > Yahoo! Groups Links > > > > > > >