Hello all. I'm wondering about more solutions to the 9060 dae error under osX. The system works fine under os 9 and I even formatted the audio drive as extended as proposed by digidesign support here in sweden. I've alsaa already disabled norton, updater and screensavers. Sincerely Markus g4867, mix plus 24, 2*888. pt6.01, logic 6.1, osx 10,2,6

I solved the same problem for me by making sure that my drives were configured as Master and slave as opposed to cable select mode which apple suggests. Cheers > From: markus enochson <markus.enochson@...> > Reply-To: logic-tdm@yahoogroups.com > Date: Tue, 27 May 2003 10:02:06 +0200 > To: <logic-tdm@yahoogroups.com> > Subject: [L-TDM] 9060 dae error egain > > Hello all. > > I'm wondering about more solutions to the 9060 dae error under osX. The > system works fine under os 9 and I even formatted the audio drive as > extended as proposed by digidesign support here in sweden. I've alsaa > already disabled norton, updater and screensavers. > > Sincerely > > Markus > > g4867, mix plus 24, 2*888. pt6.01, logic 6.1, osx 10,2,6 > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

>Have you tried this with mixplus in OS9? nope. >i am looking for another >solution outside of ESB, but everytime I add some other ASIO >hardware (828, etc) I start getting 6042 errors. ok. >If you know the multiface works, I am in! it works fine here with HD. Your milage may vary. JR

I wrote: >And also, I remember reading that thousands of colors is > >actually harder on the PCI bus than millions! Don't quote me on that, >>but it's worth checking out. That was in the early PCI days and >>possibly before AGP slots, which I believe shove the load onto the >>system bus rather than the PCI bus anyway. I've been using millions >>with no -6042 problems. Colin Miller >I have resolved many a -6042 on other peoples systems by lowering the color >depth. This requires much less data going to and from the video card and >thus less bandwidth on the PCI bus. I can't argue with that if you're not exaggerating, but I'd be willing to bet someone else's money that this wasn't on a recent G4. For a long time you could only run two monitors on a G4/PT system if you used an Appian Jeronimo 2000 card, and in those days I don't doubt that reducing the colors could help (assuming what I posted isn't true). Now Macs all come with fancy cards, and the PCI implementation is a lot better. Plus I believe that even though the AGP slot is actually a fast (4x) PCI slot, it isn't on the PCI bus - it's on the system bus. > Even Digi recommends it as a remedy for >6042 errors. No guarantee it will make a difference, but it is something to >do to streamline ones system. Couldn't hurt. The other thing is the Apple Expansion Chassis and Multiprocessor blalbla fix on the Digidesign site. You must use it with a MIX system on a fast dual-processor G4 or you definitely will get -6042 errors. > I am not aware of any plugins that actually >need millions of colors. There may very well be, but it would be in poor >judgement on the programing end since the focus should be on audio, not >display. I don't think there are any that require it. -- Nick Batzdorf 818/905-9101, cell 590-9101, fax 905-5434

Hi! I have problems with Reason and Logic.. Logic works as normal but Reason freeze in the opening process, but if I without clicking in Reason go back to Logic and press play Reason opens up, but when I try to create a instrument Reason freeze. If I try to quit Reason I get: "ReWireDLL.cpp(994) :Verify failure" and have to force quit. If I trash the preference files for Logic it works if I not change the dual processor support or Rewire2 mode in Direct TDM Audio Preferences in Logic...STRANGE!! This has happened since I installed Logic 6.1 and Reason 2.5. Reason works on it's own so it must have something to do with Rewire2. /nick

This should be a non issue sinse I use external scsi drives for audio. The only internal drive is the system drive??? Markus Den 03-05-27 10.03, skrev "Fireworx" <fire.worx@...>: > I solved the same problem for me by making sure that my drives were > configured as Master and slave as opposed to cable select mode which apple > suggests. > > Cheers > >> From: markus enochson <markus.enochson@...> >> Reply-To: logic-tdm@yahoogroups.com >> Date: Tue, 27 May 2003 10:02:06 +0200 >> To: <logic-tdm@yahoogroups.com> >> Subject: [L-TDM] 9060 dae error egain >> >> Hello all. >> >> I'm wondering about more solutions to the 9060 dae error under osX. The >> system works fine under os 9 and I even formatted the audio drive as >> extended as proposed by digidesign support here in sweden. I've alsaa >> already disabled norton, updater and screensavers. >> >> Sincerely >> >> Markus >> >> g4867, mix plus 24, 2*888. pt6.01, logic 6.1, osx 10,2,6 >> >> >> UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com >> Please email logic-tdm-owner@yahoogroups.com to contact an admin. >> >> >> >> >> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ >> >> > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Is anyone running this combination successfully? Cheers, BJ

On 5/28/03 11:41 AM, "Bryan St James" <bryanstjames@...> wrote: > Is anyone running this combination successfully? > Yes, me... Why?

on 28/5/03 7:49 PM, lolo pandora at lvee@... wrote: > On 5/28/03 11:41 AM, "Bryan St James" <bryanstjames@...> wrote: > >> Is anyone running this combination successfully? >> > > Yes, me... Why? > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > I have heard 3 horror stories...

--- lolo pandora <lvee@...> ªº¶l¥ó¤º®e¡G> On 5/28/03 11:41 AM, "Bryan St James" > <bryanstjames@...> wrote: > > > Is anyone running this combination successfully? Yes, day and night. HD4 w/ 3x 192i/o. regards bobo _________________________________________________________ ²Ä¤G¥@(Á¾^¾W)¡A² ߺD¥¢ÅÊ(®e¯ª¨à)&iex cl;A¥S©f(³¯«³¨³)... Yahoo! ¹aÁn¤U¸ü http://ringtone.yahoo.com.hk

Hello I have a problem where the tdm plugin order in Logic is wrong..... the plugin that gets instanciated is always the one below the one I am actually pointing at in the list. Also - all my saved songs come up with the wrong plugs because of this. Is there anyway to get around this? Am I the only one who has seen this happen??? Please help! I reinstalled PT a week ago to include Surround stuff, but it has been OK after that, its only today that its all gone wrong! Thanks Matt

>I have a problem where the tdm plugin order in Logic is wrong..... the plugin >that gets instanciated is always the one below the one I am actually pointing >at in the list. Also - all my saved songs come up with the wrong plugs because >of this. Is there anyway to get around this? Am I the only one who has seen >this happen??? Haven't seen this exact problem myself, but to me, this sounds like a graphics card problem. Are you using a non-standard graphics card in your Mac, i.e. a card that didn't originally come with your computer? I had similar problems with other applications back when I was using a ProMax DHMax card. Lee Blaske

--- In logic-tdm@yahoogroups.com, "phatadcow" <matt@p...> wrote: > Hello > > I have a problem where the tdm plugin order in Logic is wrong..... the plugin > that gets instanciated is always the one below the one I am actually pointing > at in the list. Also - all my saved songs come up with the wrong plugs because > of this. I've seen this problem before. Have you added or removed any plugins? Here's a possible solution..... . If you look at the available TDM Plugins in Logic and see POWr dither in the list, this could be the problem .I don't think that plugin is supposed to show up in Logic. I think the solution is to trash all the Digi Preferances...DAE prefs,Digi setup etc. startup Protools and let it create the new preferances. You might also want to trash the Logic prefs. Danny

Thanks for the reply Lee - but I'm using the graphics card that came with the computer - nothing fancy.... BTW - Logic 5.5 / Mix plus / G4 800 / 1 gig ram > Haven't seen this exact problem myself, but to me, this sounds like a > graphics card problem. Are you using a non-standard graphics card in > your Mac, i.e. a card that didn't originally come with your computer? Matt

>Thanks for the reply Lee - but I'm using the graphics card that came with the >computer - nothing fancy.... > >BTW - Logic 5.5 / Mix plus / G4 800 / 1 gig ram I know this. I did a rebuild of OS9 and it came back last week. If you aim your mouse below where you want to click it will be ok, but I amstill testing what the problem is. From memory I had to swap back a version of DAE. Are you using the latest version of DAE? 5.3.1r2... try dropping back one version. JR

I am on DAE 5.1.1 - and the problem has now gone away! I'm not sure exactly why, but I think It may have had something to do with the iLok stuff..... I have a feeling that for some reason the plugins that look at the iLok couldnt find it and so were messing up the list (or something?) I reinstalled the iLok drivers (it was the only thing left I hadnt re-installed!) and they came back OK! Thanks for everyones help....nice to know I'm not the only one who this happens to:) Matt

My system: Mac G4 500 single OS 9.2.2 Logic 6.1 w/ pro Tools 5.1.1 (DAE 5.1.1cs1) Core, (2) Farm cards, (2) i/o cards AD-8000, (4) ADAT Bridges, USD ATTO scsi card (2) DigiDrives My question: I am currently using a Radeon 8500 dual monitor card and my mouse cursor freezes quite often when dragging a window from one screen to the other. I also get stutter when recording at high track counts. Is this the fault of the Video card? I tried to find info in the digi compat. doc's but only found reference to an old Appian Jeronimo card as being supported. Is this still recommended today? What are my options? Thanks in advance for any suggestions Rich Mercado

What surround stuff were you trying ? Im looking for a plugin that will offer 8-16 discrete channels rather than 5.1 but am trying out everything I can find at the moment mick ritchie impulse studios --

I was just installing the normal PT 5.1 stuff, as I had only installed PT for stereo before. Just wanted to master some 5.1 stems so cant be much help I'm afraid. Wow - what are you trying to do with 16 channels? Matt Roberston

Although I´ve checked, that the box in the options (Drag SongPointer in Arrange in only one direction) isn´t avtivated, I can´t move the SongPointer in the area in front of my mouse click. I can´t get to the bars behind. So I have to click again some bars behind and move it back!! Any idea?? Best reagrds Chris -- Chris Simon Twin Music Greverather Weg 10 54518 Heidweiler Tel.: +49 (0) 6508 - 952161 Fax: +49 (0) 6508 - 952163 Mobil: +49 (0) 172 - 6008602 Internet: http://www.TwinMusic.de E-Mail: Info@...

> >> I'm wondering about more solutions to the 9060 dae error under osX. The > >> system works fine under os 9 and I even formatted the audio drive as > >> extended as proposed by digidesign support here in sweden. I've alsaa > >> already disabled norton, updater and screensavers. > This should be a non issue sinse I use external scsi drives for audio. The > only internal drive is the system drive??? I presume that you've got ProTools 6.0.1 installed on the machine, right? Exit out of Logic, and launch ProTools. Under "Setups->Hardware Setup" there should be a playback buffer setting (increase it to the largest amount of RAM). Don't worry about the Hardware latency settings, as this pertains to ESB / RTAS operation. I found this same anomaly opening Logic songs that played fine in OS 9 but would choke in OS X. Dave Dever

I do under 9.2.2 struggling under osx markus Den 03-05-28 11.41, skrev "Bryan St James" <bryanstjames@...>: > Is anyone running this combination successfully? > > Cheers, > BJ > > > > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Switch off "send MMC" in the options somewhere. Strange, but works here. Peter --- http://www.merlinsound.de Chris Simon wrote: > Although I´ve checked, that the box in the options (Drag SongPointer > in Arrange in only one direction) isn´t avtivated, I can´t move the > SongPointer in the area in front of my mouse click. I can´t get to > the bars behind. So I have to click again some bars behind and move > it back!!

Hi all, is it possible to watch and listen DVDs through digidesigns 888 and a connected surround system? Do I need a special app or can I route it anyhow to the DAE? Best, Matthias.

--- In logic-tdm@yahoogroups.com, Bryan St James <bryanstjames@b...> wrote: > Is anyone running this combination successfully? > > Cheers, > BJ Got the same setup (Mix+ DAE 5.1) - no problems. What problems (if any on your end?) http://www.SiliconAudioLabs.com