I've upgraded to Logic 5.5.0 and it seems to be running smoothly EXCEPT when I open a movie I just get a standard QuickTime movie window. There are none of the usual Logic parameters available: "Movie Start", "Contiguous Sync" etc. I've tried clicking and control clicking and double clicking, but nothing works. Any ideas? Ta! Ian

knee <knee@...> writes: >I've upgraded to Logic 5.5.0 and it seems to be running smoothly EXCEPT >when I open a movie I just get a standard QuickTime movie window. There >are none of the usual Logic parameters available: "Movie Start", >"Contiguous Sync" etc. I've tried clicking and control clicking and >double clicking, but nothing works. Any ideas? My students run into this problem when they double-click on the QT movie in the Finder, and it opens up in Movie Player (not in Logic). If you have indeed opened the movie from inside Logic, then a long-click down at the bottom (in the grey section) will open up the menu in question. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!"

On Monday, January 27, 2003, at 11:28 AM, f-erenc szabo wrote: > knee <knee@...> writes: >> I've upgraded to Logic 5.5.0 and it seems to be running smoothly >> EXCEPT >> when I open a movie I just get a standard QuickTime movie window. >> There >> are none of the usual Logic parameters available: "Movie Start", >> "Contiguous Sync" etc. I've tried clicking and control clicking and >> double clicking, but nothing works. Any ideas? > If you have indeed opened the movie from inside Logic, then a > long-click down at the bottom (in the grey section) will open > up the menu in question. Thanks for your prompt reply Ferenc. Unfortunately I have NO grey area. Clicking or click-and-holding anywhere produces no result, except for double-clicking the movie itself, which starts the movie. All I have is a QuickTime screen of the sort you see in a web page: the screen, and a small "play triangle" and "progress bar" underneath. There is nothing below the play triangle/progress bar. It's as if Logic has defaulted to using the QuickTime internet plug-in for playing movies. Ian ------------------------------ Ian G. Morris - Tonewright ian@... http://thenee.blogspot.com/ "Not knowing is much more interesting than believing an answer which might be wrong."

ian, >Unfortunately I have NO grey area. >Clicking or click-and-holding anywhere produces no result, except for >double-clicking the movie itself, which starts the movie. All I have is >a QuickTime screen of the sort you see in a web page: the screen, and a >small "play triangle" and "progress bar" underneath. There is nothing >below the play triangle/progress bar. It's as if Logic has defaulted to >using the QuickTime internet plug-in for playing movies. try this: command hold-click on the QT movie window. best, splattercell

On Tuesday, January 28, 2003, at 02:36 AM, texture444@... wrote: > try this: > command hold-click on the QT movie window That's it! Ta!

Hi all, I have tested a demo of the b4 direct connect with logic 5.5 and protools 5.1.3. In the moment when you use the direct connect plugin the displays of all the TDM-plugins get slow and have a little delay - as much that you cannot really work with it anymore. If you use it in Protools with the same directconnect plugin everything works fine. Check it out! Has anyone the same experience in using direct connect with logic or are there any solutions? Best wishes, Matthias.

emagicians; I have also recently upgraded to Logic 5.5, at which point I have experienced new problems with my Nord Rack2 - specifically regarding recording and playing back sysex from/to Logic which now causes the Nord to go dead. Sorry for the topic drift. thank you, steve hopkins www.hiphopkins.com __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

LAMP 5.5 PT Mix plus systems with DAE 5.1.1 Mac G4 667s OS 9.2.2 Running under DAE driver. I was under the impression that plain Audiosuite was broken in Logic's sample editor, because we were seeing "no plug-ins" under the menu item. They work correctly in Pro Tools 5.2. However today, as a test, I selected the item "no plug-ins" and up came the DigiRack Compressor plug. It worked like an Audiosuite plug should. However, I couldn't access any of the other plugs that we have. Can someone clarify - is AudioSuite SUPPOSED to be working in LAMP's sample editor, or is it known to be broken. Or what? Thanks Jonathan Perl Sonic Arts Center @ The City College Of New York (212) 650-6837 http://sonic.arts.ccny.cuny.edu

Thanks Andy for your thoughts. Haven't tried a thing yet as I've been busy making all this silly music stuff. Will let you know very shortly when i get back into the real thrill of trying to make my very expensive system run like it says on the box. __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

> Date: Mon, 27 Jan 2003 10:46:12 +1300 > From: knee <knee@...> > Subject: No parameters in movie window > > I've upgraded to Logic 5.5.0 and it seems to be > running smoothly EXCEPT > when I open a movie I just get a standard QuickTime > movie window. There > are none of the usual Logic parameters available: > "Movie Start", > "Contiguous Sync" etc. I've tried clicking and > control clicking and > double clicking, but nothing works. Any ideas? > > Ta! > > Ian > You need to hold down control as you click. Your parameters should appear. ... or is it option click ... (one of those.) __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

on 27/1/03 12:41 PM, logic-tdm@yahoogroups.com at logic-tdm@yahoogroups.com wrote: > having just upgraded to logic 5.5 I noticed that giga files are now supported, so having placed a giga CD's content into the sampler instruments and loading up logic as directed ,the name of said cd was created but no files or programs seem to have been converted! Do I have to convert the CD's files first? on a PC (I noticed some exe files)or is there something I'm not aware of regarding giga files? many thanks in advance cheers Morgan duel gig g4/tdm/esb/hd/logic 5.5

on 28/1/03 2:26 PM, Jonathan Perl at jonperl.public@... wrote: > LAMP 5.5 > PT Mix plus systems with DAE 5.1.1 > Mac G4 667s > OS 9.2.2 > > Running under DAE driver. > > I was under the impression that plain Audiosuite was broken in Logic's > sample editor, because we were seeing "no plug-ins" under the menu item. > They work correctly in Pro Tools 5.2. However today, as a test, I selected > the item "no plug-ins" and up came the DigiRack Compressor plug. It worked > like an Audiosuite plug should. However, I couldn't access any of the other > plugs that we have. > > Can someone clarify - is AudioSuite SUPPOSED to be working in LAMP's > sample editor, or is it known to be broken. Or what? > > Thanks > > Jonathan Perl > Sonic Arts Center @ The City College Of New York > (212) 650-6837 > http://sonic.arts.ccny.cuny.edu > > > > UNSUBSCRIBE: send a blank email to logic-tdm-unsubscribe@yahoogroups.com > Please email logic-tdm-owner@yahoogroups.com to contact an admin. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > I have all Audio suite plugs working in 5.2 so not sure what's up there Cheers, BJ Melbourne Australia

Just a heads up to those who may have missed it. The new towers are out. 1394b Firewire (800mbps), 1.42 Ghz, supposedly improved (quieter) cooling. OSX only, though, so we can't use them until Digidesign gets the lead out and releases PT 6. Lee Blaske

I would like to have two 17" apple lcd screens in my Protools/logic system. I need the GeForce4-TI card and the DVI to ADC Display Adapter. I would like to know if anyone use this setup today?... I need to know if there is something I should be aware of?... I want to put the Geforce4-ti into my G4/867mhz computer. I believe I read something about logic (or was that protools?) not remembering the screen positions when save/re-opening sessions?. Should I expect problems?. Modularmoog.

> From: "llxylanfagvks <llxylanfagvks@...>" <llxylanfagvks@...> > Subject: check this out! > > http://www.geocities.com/rphnfpbelvhc/index.html > > How comes, we still get xxx@y@... to subscribe??? Nikolaus Sieveking nap - nichtlineareaudioproduktionen <niko@...>

LAM 5.5.0. Just wondering if anyone else has experienced this in the new version(s). In the past, control-clicking towards the top of a number in any numerical display decremented the number and control-clicking towards the bottom decremented it (or was it the other way round?) In 5.5.0 it doesn't work, although the on-line help says it should. Ian ------------------------------ Ian G. Morris - Tonewright "Reality is that which, when we stop believing in it, is still there."

Here is the scenario: I have two 888/24, one Adat Bridge, a USD , a Midi Time Piece AV, and one Adat. The task is to transfer multiple Adat tapes (same session) into Logic (or Protools). So Far I have connected two 888s to Mix Card Core (that's the way I usually run my regular sessions), the Word Clock from USD to the 888s, MTP word clock to Adatbridge. Then the sync cable from MTP to Adat and the light pipes in/out to and from the Adat and the Adatbridge. MTP is master with internal sync mode. Almost evrything works, except that when I try to transfer if the USD is on the monitoring interface, the 888, makes a bunch of noise. (shall I hook a word out from the Adatbridge to the USD?) So if the USD is shut off it works, aside from some undesiderable digital glicht noise... Anyone out ther with a similar set who want to share some knoledge? Thank you. Sage

Hey guys, just switched to Logic TDM from PT, so excuse my ignorance, but is there a way to drag 16bit samples to a 24bit session arrange window? If not, how do you guys deal with 16bit samples? How bout stereo samples, do I need a stereo track, cause it asks me to convert to dual mono? Thanks Steve

In a message dated 1/29/03 11:03:27 AM Eastern Standard Time, steveny909@... writes: > Hey guys, just switched to Logic TDM from PT, so excuse my ignorance, > but is there a way to drag 16bit samples to a 24bit session arrange > window? If not, how do you guys deal with 16bit samples? How bout > stereo samples, do I need a stereo track, cause it asks me to convert > to dual mono? Thanks > > Steve > > > Steve, Assuming you have 16 bit files you must import into the audio window and then convert to 24 bit, unless you are using DTDM. Once in the audio window you can drag to the arrange or copy/paste. Pete Church

--- In logic-tdm@yahoogroups.com, ChaplainPC@a... wrote: > In a message dated 1/29/03 11:03:27 AM Eastern Standard Time, > steveny909@y... writes: > > > > Hey guys, just switched to Logic TDM from PT, so excuse my ignorance, > > but is there a way to drag 16bit samples to a 24bit session arrange > > window? If not, how do you guys deal with 16bit samples? How bout > > stereo samples, do I need a stereo track, cause it asks me to convert > > to dual mono? Thanks > > > > Steve > > > > > > > > Steve, > > Assuming you have 16 bit files you must import into the audio window and then > convert to 24 bit, unless you are using DTDM. Once in the audio window you > can drag to the arrange or copy/paste. > > Pete Church > > Pete thanks for the reply. So, let me get this right..if I have a stereo interleaved 16 bit file, I drag it to the audio window and convert to 2 mono files, then save/convert to 24 bit then drag to arrange window? That kinda bites. Is there a way to auto convert from stereo to mono and 16 bit to 24 bit? Didn't see anything in prefs. That leaves me with 3 copies of the file unless I clean up afterwards. Anyway, I tried all of the above, but somethings not right with DTDM. I can scrub the audio and hear it through an ESB Aux, but when I just play the file from the arrange window I dont' hear anything. Everything looks ok. The audio files are on DTDM Tracks 1&2, output 1&2. The ESB Aux is for 1&2 and like I said is working while scrubbing. Any ideas? Thanks Steve

--- In logic-tdm@yahoogroups.com, "steveny909 <steveny909@y...>" > Anyway, I tried all of the above, but somethings not right with > DTDM. I can scrub the audio and hear it through an ESB Aux, but > when I just play the file from the arrange window I dont' hear > anything. Everything looks ok. The audio files are on DTDM > Tracks 1&2, output 1&2. The ESB Aux is for 1&2 and like I said is > working while scrubbing. Any ideas? Thanks Are you using Logic 4.x? More than 1G of RAM? Rob DeBoer

--- In logic-tdm@yahoogroups.com, "Rob DeBoer <rob@b...>" <rob@b...> wrote: > --- In logic-tdm@yahoogroups.com, "steveny909 <steveny909@y...>" > > Anyway, I tried all of the above, but somethings not right with > > DTDM. I can scrub the audio and hear it through an ESB Aux, but > > when I just play the file from the arrange window I dont' hear > > anything. Everything looks ok. The audio files are on DTDM > > Tracks 1&2, output 1&2. The ESB Aux is for 1&2 and like I said is > > working while scrubbing. Any ideas? Thanks > > Are you using Logic 4.x? More than 1G of RAM? > > Rob DeBoer Rob, Logic 5.5 w/ 1gig, dual 1.25. Whether or not the file is 16bit or 24bit it doesn't play in a DTDM track, but it plays when scrubbing in the audio window. What am I missing? thx Steve

Steve, What hardware are you using? Pete

--- In logic-tdm@yahoogroups.com, "steveny909 <steveny909@y...>" <steveny909@y...> wrote: > Rob, Logic 5.5 w/ 1gig, dual 1.25. Whether or not the file is 16bit > or 24bit it doesn't play in a DTDM track, but it plays when scrubbing > in the audio window. What am I missing? thx > > Steve When you're hearing it in the audio window, is it going through the same device/channel as in the arrange window? (parameters on the left side) The playback device in the audio window will default to DAE Ch.1... Rob DeBoer