What are your Sync Settings for the two engines in Logic? Peter --- http://www.merlinsound.de Am 07.02.2008 um 12:15 schrieb ricky: > Message posted by ricky <ricky@meganite.co.uk>: > > i want to be clear... do this test > > create an empty song with dtdm turned off and nothing playing from > tdm audio tracks. > > put an exs24 on core audio intrument 1 and do a pattern and loop it > over the song... > then bounce let's say 1 minute of that loop and put the bounced file > in core audio track 1 > > now if you press play it should play in Sync, perfectly in sync. > > do not cycle the song.. loop the audio and midi and listen over the > song.. > > now in the audio you have just bounced do some random cuts over the > file in arrange with the scissor.. do not move the audio.. just cut. > > now create a tdm audio track and load anything you want on that... > put the audio in arrange, lower the volume if you want as you don't > need to hear it. > > press play now.. you will hear that even exs24 and core audio track > will flange.. and the flange changes everytime you have do the cut > with the scissors. > > so in sync with what? in sync with itself ;) > > you can still use tdm plug-ins and processings on > > 1- any live input on your tdm > 2- any aux > 3- any digital or adat input you have from core audio, i have 24 in > to put tdm plug.ins that is enough for me. > > i prefer being sample accurate than using tdm tracks, and i prefer > core audio tracks than dae tracks so i finally stop working with > stereo splitted files. > > hope it's clear now ;) > > > ________________________________________________________________________ > Logic TDM Users Group - new forums! http://logic-users.org/forums/L- > TDM > - To UNSUBSCRIBE: email logic-tdm-unsubscribe@yahoogroups.com > - Search the entire archive: http://logic-users.org/forums/L-TDM/ > search > Yahoo! Groups Links > > > >