Although I recently migrated to a Apogee/Symphony sollution, let me just chime in with my experiences regarding recording paths in L8. It seems that your autoload needs to have "No Audio Recording Path" selected under settings/recording for logic to "autodirect" your audio to the relevant folder. If something is selected there it defenitely goes there AND get's copied to the relevant project folder when you hit save. Defenitely not good if it, as in my case, ends up on the desktop, in terms of disc effiency and so forth... I ended up creating a whole new autoload to get back to "No Audio Recording Path". But then I heard from Jim F @ sonikmatter that all you need to do is open your autoload and uncheck "include assets" and save the autoload again! Now, how this relates to the DAE past 33, 65 etc. I don't know but it might be relevant. I'll keep my TDM rig on Logic 7. ATB, Erik 8 nov 2007 kl. 19.35 skrev David G Burns: > Sorry-next time I'll look at all the posts before replying.Lee,I'll > try your "include assets > fix"-sounds like a good one.Even before trying it-feels like the > right kind of Logic fix!! > cheers > David > ps-OT-I can post a recent autoload,or rather,would be curious to > see how others organize > their Logic lives...any one else > > --- In logic-tdm@yahoogroups.com, Lee Blaske <lblaske@...> wrote: > > > > OK, I think I've got things figured out. This solved my problem, at > > least, and allowed me to record tracks past #65. > > > > What I needed to do was to uncheck "Include Assets" when naming a > > session/project after opening a new one. That means you're going to > > have to create and name a folder for your project, and then name and > > put the session file within it. When I didn't have "Include Assets" > > checked, LP8 asked me where I wanted to put my DAE audio files > when I > > got to channel 33, and again at 65 (and I assume it would do so at > > 97, too). > > > > This completely fixes the problem over here. > > > > Lee Blaske > > > > > > > > On Nov 7, 2007, at 1:42 PM, Lee Blaske wrote: > > > > > > > > Just saw your post, after I posted my problem. I'm having a > similar > > > problem, but my difficulties start with channels 33 and higher. > > > > > > Lee Blaske > > > > > > On Oct 1, 2007, at 10:24 AM, David G Burns wrote: > > > > > > > Thanks Mark-looked around and could only find project settings/ > > > > recording/DAE recording > > > > folder,where you can enter a location and "set".Under 7 there > was > > > > the option of "song > > > > folder" versus "global",which seems to be gone now.I think > it's a > > > > deeper problem than that > > > > because I get the tdm setup icon after hitting record on any > track > > > > above 64 and than the > > > > bounce ball,and than Logic crashes and creates a crashed song > > > > doc.I'm fearing that PT 7.4 > > > > will be the cure,unless anyone else can confirm or deny my > > > > glitch.Is anyone out there > > > > running LP8 under TDM with 7.3.1 and can record on track 65 or > > > > higher.I can't be the only > > > > one here.... > > > > holding my breath > > > > David > > > > > > > > --- In logic-tdm@yahoogroups.com, "ativity2003" <me@> wrote: > > > > > > > > > > If L8 allows it, did you REMOVE RECORD PATH before trying to > > > record > > > > > above track 64? This is in Audio Config in L7, so don't know > > > > where it > > > > > can be found in L8...anyway, for me, doing that in L7 always > > > > corrected > > > > > the problem you describe. > > > > > > > > > > best > > > > > > > > > > Mark > > > > > > > > > > > > > > > > > > > > > > > > > --- In logic-tdm@yahoogroups.com, "David G Burns" <david@> > wrote: > > > > > > > > > > > > Been with LP8 for a week or so,can't seem to be able to > > > record to > > > > > audio tracks 65 or higher > > > > > > under tdm,simply crashes.Tried with virgin LP8 template as > > > well as > > > > > older LP7 ones.PT works > > > > > > fine.dual G5 1.8,OSX 10.4.10,PT 7.3.1 cs4,TDM HD3 accel. > > > > > > > > > > > > Other misc annoyances-1-turning touch auto creates a > duplicate > > > > > track below in the arrange.. > > > > > > 2-the mackie control defaults to viewing 16 rather than 8 > > > > tracks,as > > > > > though it thinks there are > > > > > > two controllers,and shows the second one's tracks so > there is an > > > > > offset between what the > > > > > > arrange shows as being on the control surface,and what is > > > actually > > > > > displayed on it.Being in > > > > > > "single mode" works as expected though...any one else has > > > this..?? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >