On Apr ,21, 2008, at 2:41 PM, John Abram wrote: > I'm trying to switch EXS in Logic Studio (8.1) from poly to legato > using a pedal switch. > The Logic 8 manual does not even list the controllers for any of these > functions, though Logic 7's manual tells me it's CC 71. > > But I can't seem to get CC71 (or any other controller) to talk to EXS > in either version of Logic - is there something I'm forgetting about > here? Hi John , I just checked, by hooking up a monitor to the channel strip, and it seems like the three modes are controlled by fader message 7. A value of 0 is poly, 1 is mono, and 2 is legato. Don't forget that these respond to fader messages; so you'll need to hook up a transformer in the environment to convert the incoming pedal messages appropriately. Also, don't forget that with L8's internal architecture, the instrument plugins are set to respond on MIDI channel 2. HTH. -------- Eli Krantzberg http://www.elikrantzberg.com http://www.nightshiftorchestra.com ------------------------------------