|
Forum Index | Read EXS: Policy/Rules Messages Threads Digests | Post New Message | Search!
--- In exs-users@yahoogroups.com, "soundrazor"
<greggo314@...> wrote:
>
> In my outboard Emu Ultra, I can set the sample start point to correlate
to the key being
> pressed. Correctly setting the modulation amount with source as key
and destination as
> sample start point will trigger a sample to play back from different
beat subdivisions
based
> on the key pressed. The main goal of such a setup is to beat slice
without actually
having to
> cut a sample into different audio files.
>
You don't HAVE to cut a sample into different audio files, but it would
probably actually be
easier to do so. Just be sure to backup your original file.
If I were going to do it the way you're trying to, here's how I'd do it:
First I'd look at those
beat slices and note at which sample each one starts. Then I'd create a new
instrument.
Then I'd create however many zones I need, probably mapped only to white
keys. Then I'd
load the sample to each zone and disable pitch (just to be safe). Finally,
I'd set the start
point of each zone at the sample the beat starts and end point at the last
sample before
the next beat.
Of course, you'll want to alter attack/decay time from the front of EXS so
you avoid
"surprises."
I've pondered making construction kits, but one life is just too short to
get to everything.
The problem with the above method is that the same long sample would be
loaded
multiple times, decreasing your sample RAM. You might as well chop it up.
I'm not sure
modulation source/destination will work, although technically it SHOULD,
because there's
the question of accurately starting the sample at the correct point. If you
have, say, 4
beats and the keys were set to trigger a percentage modulation, like 0%,
25%, 50%, and
75% respectively, and each beat occurs at EXACTLY those points, then there
shouldn't be
any problem. Just set it up in the EXS router.
Or you could just keep things simple and chop it up. ;)
I've never tried it your way before, but I think I'll check it out to see if
it CAN be done. I'm
sure it can.
yours,
Kyle Beckham
Forum Index | Read EXS: Policy/Rules Messages Threads Digests | Post New Message | Search! © 1994-2008, All Rights Reserved. |